聚酰胺 (尼龙) - PLUSTEK Plastic Materials
|
产品 |
产品说明 |
|
PLUSTEK PA100/PA100NT-N |
GENERAL PURPOSE POLYAMIDE 6.6 GRADE FOR INJECTION ... |
|
PLUSTEK PA103 |
LOW VISCOSITY POLYAMIDE 66 FOR INJECTION MOULDING ... |
|
PLUSTEK PA106 |
POLYAMIDE 66 WITH MOLIBDENIUM DISULFIDE, LOW FRICT... |
|
PLUSTEK PA108 |
GOOD SURFACE FINISH POLYAMIDE 6/6.6 ALLOY FOR INJE... |
|
PLUSTEK PA112NT |
POLYAMIDE 66 FILLED WITH PTFE TO IMPROVE WEAR RESI... |
|
PLUSTEK PA124 |
A FAST CYCLE POLYAMIDE 6.6 GRADE FOR INJECTION MOU... |
|
PLUSTEK PA201 |
HIGH VISCOSITY POLYAMIDE 66 FOR EXTRUSION APPLICATIONS. |
|
PLUSTEK PA301G2 |
HEAT STABILIZED, 10% GLASS FIBER REINFORCED POLYAM... |
|
PLUSTEK PA301G3 |
Heat Stabilized, 15% Glass Fiber Reinforced Polyam... |
|
PLUSTEK PA301G33 |
33% GLASS-FIBER REINFORCED, HEAT STABILIZED POLYAM... |
|
PLUSTEK PA301G4 |
20% GLASS-FIBER REINFORCED, HEAT STABILIZED POLYAM... |
|
PLUSTEK PA301G5 |
Heat Stabilized, 25% Glass Fiber Reinforced Polyam... |
|
PLUSTEK PA301G50 |
Heat Stabilized, 50% Glass Fiber Reinforced Polyam... |
|
PLUSTEK PA301G6 |
Heat Stabilized, 30% Glass Fiber Reinforced Polyam... |
|
PLUSTEK PA301G7 |
Heat Stabilized 35% Glass Fiber Reinforced Polyami... |
|
PLUSTEK PA303G33 |
33% Glass Fiber Reinforced, Heat Stabilized and Hy... |
|
PLUSTEK PA303G4 |
20% Glass Fiber Reinforced, Heat Stabilized and Hy... |
|
PLUSTEK PA303G43 |
43% Glass Fiber Reinforced, Heat Stabilized and Hy... |
|
PLUSTEK PA303G5 |
25% Glass Fiber Reinforced, Heat Stabilized and Hy... |
|
PLUSTEK PA303G50 |
50% Glass Fiber Reinforced, Heat Stabilized and Hy... |
|
PLUSTEK PA303G6 |
30% Glass Fiber Reinforced, Heat Stabilized, Hydro... |
|
PLUSTEK PA303G6BK16 |
30% GLASS FIBER REINFORCED,HEAT STABILIZED,HYDROLY... |
|
PLUSTEK PA305G6 |
HEAT STABILIZED, IMPROVED SURFACE QUALITY,30%GLASS... |
|
PLUSTEK PA309G6 |
30% GLASS FIBER REINFORCED, UV STABILIZED POLYAMID... |
|
PLUSTEK PA310G8BK10 |
HEAT STABILIZED 40% GLASS-FIBER REINFORCED POLYAMI... |
|
PLUSTEK PA313G43 |
HEAT STABILIZED 43% GLASS FIBER REINFORCED POLYAMI... |
|
PLUSTEK PA320G3 |
15% GLASS FIBER REINFORCED FLAME RETARDANT POLYAMI... |
|
PLUSTEK PA320G4 |
20% GLASS-FIBER REINFORCED, FLAME RETARDANT POLYAM... |
|
PLUSTEK PA320G5 |
25% GLASS-FIBER REINFORCED, FLAME RETARDANT AND HI... |
|
PLUSTEK PA320G6 |
30% GLASS-FIBER REINFORCED, FLAME RETARDANT POLYAM... |
|
PLUSTEK PA323G6 |
30% GLASS FIBER REINFORCED, FLAME RETARDANT POLYAM... |
|
PLUSTEK PA324G6 |
30% GLASS FIBER REINFORCED POLYAMIDE 66 FOR HIGH S... |
|
PLUSTEK PA325G5 |
25% Glass Fiber Reinforced, Flame Retardant, Halog... |
|
PLUSTEK PA325G6 |
30% Glass Fiber Reinforced Flame Retardant, Haloge... |
|
PLUSTEK PA340S05 |
5% GLASS-BEADS REINFORCED POLYAMIDE 6.6, HEAT STAB... |
|
PLUSTEK PA340S4 |
20% GLASS-BEADS REINFORCED POLYAMIDE 66 FOR INJECT... |
|
PLUSTEK PA340S6 |
30% Glass Beads Reinforced Polyamide 6.6 for Injec... |
|
PLUSTEK PA340S8 |
40% GLASS-BEADS REINFORCED POLYAMIDE 6.6 FOR INJEC... |
|
PLUSTEK PA341G9 |
45% GLASS-FIBERS REINFORCED, HIGH STIFFNESS AND LO... |
|
PLUSTEK PA350M4 |
20% Mineral Reinforced Polyamide 6.6 for Injection... |
|
PLUSTEK PA350M6 |
30% Minerals Reinforced Polyamide 6.6 for Injectio... |
|
PLUSTEK PA3510M8 |
40% Minerals Reinforced Polyamide 6.6 for Injectio... |
|
PLUSTEK PA352M6 |
30% Low Friction Mineral Filled, Polyamide 6.6 lub... |
|
PLUSTEK PA355M6 |
30% Mineral Filled, Flame Retardant Polyamide 6.6 ... |
|
PLUSTEK PA360G6 |
30% Glass Fiber Reinforced with Molybdenium Disulf... |
|
PLUSTEK PA4501G6 |
30% GLASS FIBER REINFORCED POLYAMIDE 66 FOR LOW FR... |
|
PLUSTEK PA4801G6 |
30% Glass Fiber Reinforced, PTFE Lubricated Polyam... |
|
PLUSTEK PA4802G6BK10 |
30% Glass Fiber Reinforced, PTFE Lubricated Polyam... |
|
PLUSTEK PA500 |
FLAME RETARDNAT POLYAMIDE 6.6 FOR INJECTION MOULDI... |
|
PLUSTEK PA507 |
FLAME RETARDANT POLYAMIDE 6.6 FOR INJECTION MOULDI... |
|
产品 |
产品说明 |
|
PLUSTEK PA517 |
Halogen Free Polyamide 6.6/6. Formulated to meet V... |
|
PLUSTEK PA600 |
HEAT STABILIZED POLYAMIDE 6.6 FOR INJECTION MOULDI... |
|
PLUSTEK PA602 |
HEAT STABILIZED POLYAMIDE 6.6 FOR INJECTION MOULDI... |
|
PLUSTEK PA604 |
HIGH HEAT STABILIZED POLYAMIDE 6.6 FOR INJECTION M... |
|
PLUSTEK PA700BL10 |
UV STABILIZED POLYAMIDE 6.6 FOR INJECTION MOULDING... |
|
PLUSTEK PA801 |
IMPACT MODIFIED POLYAMIDE 6.6 COPOLYMER FOR INJECT... |
|
PLUSTEK PA803 |
IMPACT MODIFIED POLYAMIDE 6.6 FOR INJECTION MOULDI... |
|
PLUSTEK PA804 |
Impact Modified Polyamide 6.6 for Injection Mouldi... |
|
PLUSTEK PA810 |
IMPACT MODIFIED POLYAMIDE 6.6 FOR INJECTION MOULDI... |
|
PLUSTEK PA823M6 |
30% MINERALS REINFORCED IMPACT MODIFIED POLYAMIDE ... |
|
PLUSTEK PA830 |
IMPACT MODIFIED POLYAMIDE 6.6 FOR INJECTION MOULDI... |
|
PLUSTEK PA840G13 |
IMPACT MODIFIED 13% GLASS FIBER REINFORCED, HEAT R... |
|
PLUSTEK PA840G3 |
15% GLASS-FIBER REINFORCED, IMPACT MODIFIED POLYAM... |
|
PLUSTEK PA840G6 |
30% GLASS FIBER IMPACT MODIFIED POLYAMIDE 6.6 FOR ... |
|
PLUSTEK PA840G7 |
35%GLASS FIBERS REINFORCED , IMPACT MODIFIED POLYA... |
|
PLUSTEK PA841 |
IMPACT MODIFIED POLYAMIDE 6.6 FOR INJECTION MOULDI... |
|
PLUSTEK PA860 |
Very High Impact Modified Polyamide 6.6 for Inject... |
|
PLUSTEK PA862 |
HIGH IMPACT MODIFIED POLYAMIDE 6.6 FOR INJECTION M... |
|
PLUSTEK PA865G6 |
30% GLASS FIBER REINFORCED, IMPACT MODIFIED POLYAM... |
|
PLUSTEK PA870G33 |
33% Glass Fiber Reinforced , Impact Modified Polya... |
|
PLUSTEK PA880 |
Very High Impact Polyamide 6.6 for Injection Mould... |
|
PLUSTEK PB140 |
Polyamide 6, Slow Nucliation for Injection Mouldin... |
|
PLUSTEK PB142 |
General purpose Fast Cycle Polyamide 6 for Injecti... |
|
PLUSTEK PB145 |
General puprpose Polyamide 6 for Fast Cycle Inject... |
|
PLUSTEK PB150 |
General purpose Fast Cycle Polyamide 6 for Injecti... |
|
PLUSTEK PB200 |
Polyamide 6 high viscosity , formulated for extrus... |
|
PLUSTEK PB202G50BK39 |
50% GLASS FIBER REINFORCED, UV AND HEAT SATBILIZED... |
|
PLUSTEK PB300G2 |
10% Glass Fiber Reinforced, Heat Stabilized Polyam... |
|
PLUSTEK PB300G3 |
15% Glass Fiber Reinforced, Heat Stabilized Polyam... |
|
PLUSTEK PB300G33/310G6 |
30%/33% Glass Fiber Reinforfced, Heat Stabilized P... |
|
PLUSTEK PB300G4 |
20% Glass Fiber Reinforced, Heat Stabilized Polyam... |
|
PLUSTEK PB300G5 |
25% Glass Fiber Reinforced, Heat Stabilized Polyam... |
|
PLUSTEK PB300G6 |
30% Glass Fiber Reinforced, Heat Stabilized Polyam... |
|
PLUSTEK PB300G7 |
35% Glass Fiber Reinforced, Heat Stabilized Polyam... |
|
PLUSTEK PB302G3 |
15% Glass Fiber Reinforced, Heat Stabilized Polyam... |
|
PLUSTEK PB302G50BK39P |
50% Glass Fiber Reinforced, UV and Heat Stabilized... |
|
PLUSTEK PB302G8 |
40% Glass Fiber Reinforced, Heat Stabilized Polyam... |
|
PLUSTEK PB303G6 |
30% Glass Fiber Reinforced, Heat Stabilized Polyam... |
|
PLUSTEK PB304G7 |
35% Glass Fiber Reinforced, Heat Stabilized and Im... |
|
PLUSTEK PB305G33 |
33% Glass Fiber Reinforced, UV and Heat Stabilized... |
|
PLUSTEK PB305G33BK37/43 |
33% Glass Fiber Reinforced, UV and Heat Stabilized... |
|
PLUSTEK PB306G6 |
Improved Surface Finish 30% Glass Fiber Reinforced... |
|
PLUSTEK PB310G6 |
30% GLASS FIBER REINFORCED POLYAMIDE 66, HEAT STAB... |
|
PLUSTEK PB312J6 |
30% GLASS-FIBER AND GLASS-BEADS REINFORCED POLYAMI... |
|
PLUSTEK PB315G33 |
33% GLASS FIBER REINFORCED, HEAT AND UV STABILIZED... |
|
PLUSTEK PB318G9 |
45% GLASS FIBER REINFORCED POLYAMIDE 6, UV STABILI... |
|
PLUSTEK PB320G3 |
15% GLASS FIBER REINFORCED FLAME RETARDANT POLYAMI... |
|
PLUSTEK PB320G6 |
30% GLASS-FIBER REINFORCED, FLAME RETARDANT POLYAM... |
|
PLUSTEK PB321I6 |
30% Glass Fiber and Mineral Reinforced Polyamide 6... |
|
PLUSTEK PB330I6 |
30% MINERAL AND GLASS FIBER FILLED , HEAT STABILIZ... |
|
产品 |
产品说明 |
|
PLUSTEK PB340S4 |
20% GLASS-BEADS REINFORCED, POLYAMIDE 6 FOR INJECT... |
|
PLUSTEK PB340S50 |
50% GLASS-BEADS REINFORCED,HEAT STABILIZED POLYAMI... |
|
PLUSTEK PB340S6 |
30% Glass Beads Reinforced, Polyamide 6 for Inject... |
|
PLUSTEK PB350M6 |
|
|
PLUSTEK PB350M8 |
20% Mineral Filled Polyamide 6 for Injection Mould... |
|
PLUSTEK PB351I6 |
30% Glass Fiber and Mineral Reinforced Polyamide 6... |
|
PLUSTEK PB500 |
Flame Retardant Polyamide 6 for Injection Moulding... |
|
PLUSTEK PB507 |
Flame Retardant Halogen Free Polyamide 6 for Injec... |
|
PLUSTEK PB508 |
POLYAMIDE PA6 FLAME RETARDANT (20) FOR INJECTION M... |
|
PLUSTEK PB702 |
Polyamide 6 UV Stabilized for Fast Cycle Injection... |
|
PLUSTEK PB801 |
Impact Modified Polyamide 6 for Injection Moulding... |
|
PLUSTEK PB825G5 |
25% Glass Fiber Reinforced, Impact Modified Polyam... |
|
PLUSTEK PB826G3 |
15% Glass Fiber Reinforced, Impact Modified and UV... |
|
PLUSTEK PB840 |
IMPACT MODIFIED POLYAMIDE 6 FOR INJECTION MOULDING... |
|
PLUSTEK PB841 |
IMPACT MODIFIED POLYAMIDE 6 FOR INJECTION MOULDING... |
|
PLUSTEK PB845 |
IMPACT MODIFIED POLYAMIDE 6 FOR INJECTION MOULDING... |
|
PLUSTEK PB847I4 |
20% GLASS FIBER AND MINERAL REINFORCED, IMPACT MOD... |
|
PLUSTEK PB890 |
IMPACT MODIFIED POLYAMIDE 6 FOR INJECTION MOULDING... |
|
PLUSTEK PB891 |
IMPACT MODIFIED POLYAMIDE 6 FOR INJECTION MOULDING... |
|
PLUSTEK PB901 |
POLYAMIDE 6 FOR VERY THIN ELECTRICAL EXTRUDED CABLE COATING. |
|
PLUSTEK PD100 |
UNFILLED POLYAMIDE 12 FOR INJECTION MOULDING APPLICATIONS. |
|
PLUSTEK PD1002NT |
Medium viscosity Polyamide 12 extrusion type. |
|
PLUSTEK PD120BK11 |
POLYAMIDE 12 UV STABILIZED FOR EXTRUSION APPLICATIONS. |
|
PLUSTEK PD300G4 |
20% GLASS-FIBER REINFORCED POLYAMIDE 12 FOR INJECT... |
|
PLUSTEK PD300G5 |
25% GLASS-FIBER REINFORCED POLYAMIDE 12,HEAT STABI... |
|
PLUSTEK PD300G6 |
30% GLASS-FIBER REINFORCED POLYAMIDE 12 FOR INJECT... |
|
PLUSTEK PD304G6YL55 |
30% GLASS FIBER REINFORCED POLYAMIDE 12 FOR INJECT... |
|
PLUSTEK PD305G6 |
30% GLASS FIBER REINFORCED POLYAMIDE 12 FOR INJECT... |
|
PLUSTEK PD502G6 |
30% GLASS FIBER REINFORCED, V-0 1.6mm, POLYAMIDE 1... |
|
PLUSTEK RA102 |
General Purpose Polyamide 6.6 for Injection Mouldi... |
|
PLUSTEK RA103 |
IMPACT RESISTANCE POLYAMIDE 66 FOR INJECTION MOULD... |
|
PLUSTEK RA115 |
POLYAMIDE 66 FOR INJECTION MOULDING APPLICTIONS. |
|
PLUSTEK RA116 |
POLYAMIDE 66 FOR INJECTION MOULDING APPLICTIONS. |
|
PLUSTEK RA124 |
A FAST CYCLE POLYAMIDE 66 FOR INJECTION MOULDING A... |
|
PLUSTEK RA300G3 |
15% GLASS-FIBER REINFORCED POLYAMIDE 66 FOR INJECT... |
|
PLUSTEK RA300G4 |
20% GLASS-FIBER REINFORCED POLYAMIDE 66 FOR INJECT... |
|
PLUSTEK RA300G6 |
30% GLASS-FIBER REINFORCED POLYAMIDE 66 FOR INJECT... |
|
PLUSTEK RA300G7 |
HEAT STABILIZED 35% GLASS FIBER REINFORCED POLYAMI... |
|
PLUSTEK RA301G5 |
HEAT STABILIZED,25% GLASS-FIBERS REINFORCED POLYAM... |
|
PLUSTEK RA301G6 |
HEAT STABILIZED, 30% GLASS-FIBER REINFORCED POLYAM... |
|
PLUSTEK RA301G8 |
HEAT STABILIZED 40% GLASS FIBER REINFORCED POLYAMI... |
|
PLUSTEK RA303G3 |
15% GLASS FIBER REINFORCED HEAT STABILIZED AND HYD... |
|
PLUSTEK RA303G33 |
33% GLASS FIBER REINFORCED HEAT STABILIZED AND HID... |
|
PLUSTEK RA303G4 |
20% GLASS-FIBER REINFORCED, HEAT STABILIZED POLYAM... |
|
PLUSTEK RA303G50 |
50% GLASS FIBER REINFORCED, HEAT STABILIZED AND HY... |
|
PLUSTEK RA303G6 |
30% GLASS-FIBER REINFORCED, HEAT STABILIZED AND HY... |
|
PLUSTEK RA303G7 |
35% GLASS-FIBER REINFORCED, HEAT STABILIZED AND HY... |
|
PLUSTEK RA304G6 |
30% GLASS FIBER REINFORCED, HEAT STABILIZED AND HY... |
|
PLUSTEK RA307G4 |
20% GLASS FIBER REINFORCED, HEAT STABILIZED POLYAM... |
|
PLUSTEK RA314G50 |
50% GLASS FIBER REINFORCED , HEAT STABILIZED POLYA... |
|
产品 |
产品说明 |
|
PLUSTEK RA320G3 |
15% GLASS FIBER REINFORCED FLAME RETARDANT POLYAMI... |
|
PLUSTEK RA320G5 |
25% GLASS-FIBER REINFORCED, FLAME RETARDANT AND HI... |
|
PLUSTEK RA320G6 |
30% GLASS FIBER REINFORCED, FLAME RETARDANT POLYAM... |
|
PLUSTEK RA321G6 |
30% GLASS FIBER REINFORCED, FLAME RETARDANT POLYAM... |
|
PLUSTEK RA325G4 |
20% Glass Fiber Reinforced, Self Extinguishing Hal... |
|
PLUSTEK RA325G5 |
25% GLASS-FIBER REINFORCED, SELF EXTINGUISHING HAL... |
|
PLUSTEK RA325G6 |
30% Glass Fiber Reinforced Flame Retardant, Haloge... |
|
PLUSTEK RA325J5 |
25% GLASS- BEADS AND GLASS-FIBER REINFORCED, FLAME... |
|
PLUSTEK RA331G6 |
30% GLASS-FIBER REINFORCED POLYAMIDE 66 FOR INJECT... |
|
PLUSTEK RA334G6 |
30% GLASS-FIBER REINFORCED POLYAMIDE 66 FOR INJECT... |
|
PLUSTEK RA341M16 |
16% MINERAL FILLED, IMPACT MODIFIED, DIMENSIONAL S... |
|
PLUSTEK RA353M8 |
40% MINERAL FILLED POLYAMIDE 66, TO INCREASE DIMEN... |
|
PLUSTEK RA502 |
POLYAMIDE 66, FLAME RETARDANT FOR INJECTION MOULDI... |
|
PLUSTEK RA601 |
HEAT RESISTANCE POLYAMIDE 66 FOR INJECTION MOULDIN... |
|
PLUSTEK RA702 |
UV STABILIZIED POLYAMIDE 66 FOR INJECTION MOLDING ... |
|
PLUSTEK RA843 |
IMPACT MODIFIED POLYAMIDE 66 FOR INJECTION MOULDIN... |
|
PLUSTEK RA844 |
IMPACT MODIFIED, UV AND HEAT STABILIZED POLYAMIDE ... |
|
PLUSTEK RA845 |
IMPROVED IMPACT POLYAMIDE 66 FOR GOOD RESISTANCE T... |
|
PLUSTEK RA846 |
IMPACT MODIFIED AND HEAT STABILIZED POLYAMIDE 66 F... |
|
PLUSTEK RB133 |
INDUSTRIAL GRADE GENERAL PURPOSE POLYAMIDE 6 FOR I... |
|
PLUSTEK RB145 |
INDUSTRIAL GRADE GENERAL PURPOSE POLYAMIDE 6 FOR I... |
|
PLUSTEK RB300G6 |
INDUSTRIAL GRADE 30% GLASS-FIBER REINFORCED POLYAM... |
|
PLUSTEK RB301G6 |
INDUSTRIAL GRADE 30% GLASS-FIBER REINFORCED POLYAM... |
|
PLUSTEK RB306G6 |
30% GLASS-FIBER REINFORCED, HEAT STABILIZED POLYAM... |
|
PLUSTEK RB506 |
FLAME RETARDANT POLYAMIDE 6 FOR INJECTION MOULDING... |
|
PLUSTEK RB703 |
INDUSTRIAL GRADE GENERAL PURPOSE POLYAMIDE 6 FOR I... |
|
PLUSTEK RB841 |
IMPACT MODIFIED POLYAMIDE 6 FOR INJECTION MOULDING... |
|
PLUSTEK RB845 |
IMPACT MODIFIED POLYAMIDE 6 FOR INJECTION MOULDING... |
|
PLUSTEK RD101 |
UNFILLED FLEXIBLE POLYAMIDE 12 FOR INJECTION MOULD... |
|
PLUSTEK RD104 |
UNFILLED FLEXIBLE POLYAMIDE 12 FOR INJECTION MOULD... |
|
PLUSTEK RD120 |
POLYAMIDE 12 FOR EXTRUSION APPLICATIONS. |
|
PLUSTEK RD302G6 |
30% GLASS-FIBER RINFORCED POLYAMIDE 12 FOR INJECTI... |