瑞士EMS符合WRAS（英国饮用水安全）安全认证型号大全

Nylon

Section 5180

Material only

Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number 1304530

Wondel AG6BK-S01. Black coloured, injection moulded PA66 material. For use with water up to 85°C.

Supplier: Nanjing Julong Science & Technology Co. Ltd.

WRAS Approval Number 1112518

Nylfor A2. Off-white coloured, injection moulded PA66 nylon material. For use with water up to 85°C.

Supplier: Imagro UK Ltd.

WRAS Approval Number 1110532

Ultramid A3EG10 FC Aqua Black 23285. Black coloured, injection moulded PA66 material. For use with water up to 85°C.

Supplier: BASF SE

WRAS Approval Number 1203515

FIBROTEX Nylon 6,6. White coloured, extruded nylon yarn. For use with water up to 23°C.

Supplier: Kalsep UK Limited

WRAS Approval Number 1407533

Radilon A RCM4010RKC 306 NER. Black coloured, injection moulded nylon material. For use with water up to 85°C.

Supplier: Radicinovacips Spa

WRAS Approval Number 1302516

Grilon TSM-40/4 natural. Beige coloured, injection moulded nylon material. For use with water up to 85°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1211502

Nilamid A3H5G6 Natural (manufactured by Nilit Plastics Europe S.r.l. and Nilit (Suzhou) Engineering Plastic Technologies Co. Ltd.). Pale olive green coloured, translucent, glass fibre reinforced nylon material. Beginning 1st January 2014 the material will be named Nilamid A3 WR GF30 NC. For use with water up to 85°C.

Supplier: Nilit Plastics Europe Srl.

WRAS Approval Number 1307507

Polimid A30GF Natural WR. Natural coloured, injection moulded PA66 material. For use with water up to 85°C.

Supplier: Poliblend S.p.A.

WRAS Approval Number 1111528

Ultramid® B3EG7 black 00564 (Black coloured) & Ultramid® B3EG7 uncolored (Beige coloured), injection moulded nylon material. For use with water up to 85°C.

Supplier: BASF SE

WRAS Approval Number 1312527

Ultramid®B3EG3 Black 00564. Black coloured, injection moulded polyamide 6 material. For use with water up to 85°C.

Supplier: BASF South East Asia Pte. Ltd.

WRAS Approval Number 1204530

Zytel® FG101L NC010. White translucent coloured (un-pigmented), injection moulded nylon. For use with water up to 23°C. Zytel® FG42A NC010. White translucent coloured (un-pigmented), injection moulded nylon. For use with water up to 85°C.

Supplier: DuPont (UK) Ltd

WRAS Approval Number 1302512

Akroloy PA GF 30 8 schwarz (4171), Akroloy PA GF 40 8 schwarz (4172), Akroloy PA GF 50 8 schwarz (4173) & Akroloy PA GF 60 8 schwarz (4174). Black coloured, extruded nylon material. For use with water up to 23°C.

Supplier: Akro Plastic GmbH

WRAS Approval Number 1302501

Vitamide AR86BK. Black coloured, injection moulded nylon material (manufactured in Malaysia and the UK). For use with water up to 85°C.

Supplier: JGP Perrite (Warrington)

WRAS Approval Number 1301544

Zytel FG77G33L NC010. Beige coloured, injection moulded, glass reinforced polyamide material. For use with water up to 85°C.

Supplier: DuPont (UK) Ltd

WRAS Approval Number 1403533

Grilon TSG-30/4 FA Black 9840. Black coloured, injection moulded PA material. For use with water up to 85°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1407519

Badamid B70 GF/GK30 H WL Black. Black coloured, injection moulded PA material. For use with water up to 85°C.

Supplier: Bada Hispanaplast S.A.

WRAS Approval Number 1405560

Nylfor F664E30HU NA 0001. White coloured, injection moulded PA66 material. For use with water up to 85°C.

Supplier: SO.F.TER s.p.a.

WRAS Approval Number 1406510

Grilamid TR 60 natural. Amber coloured, injection moulded nylon material. For use with water up to 85°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1408513

Ultramid A3K FC Aqua Uncoloured. Natural, injection moulded PA66 material. For use with water up to 85°C.

Supplier: BASF SE

WRAS Approval Number 1406511

Grilamid TR 55 natural. Light amber coloured, injection moulded nylon material. For use with water up to 85°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1201515

Zytel® FG70G30HSR3 BK309. Black coloured, injection moulded nylon material. For use with water up to 85°C.

Supplier: DuPont (UK) Ltd

WRAS Approval Number 1408505

Durethan BKV 15 F 901510 DUS018. Black coloured, injection moulded nylon material. For use with water up to 85°C.

Supplier: Lanxess Deutschland GmbH

WRAS Approval Number 1308504

Crastin® SK605 NC010. Cream coloured, injection moulded polybutylene terephthalate (PBT) material. For use with water up to 85°C. This approval only covers Crastin® SK605 NC010 manufactured at the German production site.

Supplier: DuPont (UK) Ltd

WRAS Approval Number 1307521

Zytel® FG70G30HSR2 BK309. Black coloured, injection moulded nylon sheet material. For use with water up to 85°C.

Supplier: DuPont (UK) Ltd

WRAS Approval Number 1306517

Latigloss 66 H2 G/50 Blue:7393F2. Blue coloured, injection moulded nylon material. For use with water up to 23°C.

Supplier: Lati Industria Termoplastici Spa

WRAS Approval Number 1306507

Relon A500 Nero 4095 GF30 K. Black coloured, injection moulded, glass filled PA66 nylon material. For use with water up to 80°C.

Supplier: FB Tecnopolimeri Srl.

WRAS Approval Number 1407532

Radilon A RV500RKC 106 NAT. Beige coloured, injection moulded nylon material. For use with water up to 85°C.

Supplier: Radicinovacips Spa

WRAS Approval Number 1008553

Schulamid 66 GF35 FC4 Black. Black coloured, injection moulded PA66 nylon material. For use with water up to 85°C.

Supplier: A.Schulman GmbH.

WRAS Approval Number 0911505

Rilsan G BZM 30 O TLD A. Beige coloured, injection moulded, glass fibre reinforced nylon material. For use with hot and cold water up to 85°C.

Supplier: Arkema

WRAS Approval Number 1009536

BUM 30 O. Light grey coloured, injection moulded nylon 11. For use with water up to 23°C.

Supplier: Arkema

WRAS Approval Number 1009535

BMN G8 TLDA. Black coloured, injection moulded Nylon 11 with 3% graphite. For use with water up to 23°C.

Supplier: Arkema

WRAS Approval Number 1303510

Leona 90W50 W33C5. Black coloured, injection moulded nylon material. For use with water up to 85°C.

Supplier: Asahi Kasei Plastics Europe S.A./N.V.

WRAS Approval Number 1405533

Xyron AW213 U7015. Black coloured, injection moulded glass filled fibre PPE/Nylon sheet material. For use with water up to 60°C.

Supplier: Asahi Kasei Plastics North America Inc

WRAS Approval Number 1209542

Ultramid A3EG7 FC Aqua Black 23285. Black coloured, injection moulded PA66 nylon material. For use with water up to 65°C.

Supplier: BASF SE

WRAS Approval Number 1202541

Ultramid D3EG10 FC Aqua Black 23285. Black coloured injection moulded polyamide material. For use with water up to 65°C.

Supplier: BASF SE

WRAS Approval Number 1109535

Ultramid A3EG7 FC Uncoloured & Ultramid A3EG7 FC Aqua UN. Natural coloured, injection moulded, PA66 polyamide material. For use with water up to 65°C.

Supplier: BASF SE

WRAS Approval Number 1009513

Ultramid S3EG6 Uncoloured & Ultramid S3EG6 Aqua UN. Natural coloured, injection moulded polyamide material. For use with water up to 85°C.

Supplier: BASF SE

WRAS Approval Number 1208504

Zytel FG70G30HSLR NC010. Beige coloured, injection moulded nylon material. For use with water up to 85°C.

Supplier: DuPont (UK) Ltd

WRAS Approval Number 1206520

Zytel® HTNFG52G35HSLR BK011. Black coloured, injection moulded polyphthalamide (PPA) material. For use with water up to 85°C.

Supplier: DuPont (UK) Ltd

WRAS Approval Number 1204529

Zytel® 70G30HSLR BK099. Black coloured, injection moulded nylon. For use with water up to 85°C.

Supplier: DuPont (UK) Ltd

WRAS Approval Number 1301505

Grivory XE 4101 black 9225 & Grivory HT3V-40 FWA black 9225. Black coloured, injection moulded nylon material. Grivory XE 4101 natural & Grivory HT3V-40 FWA natural. Natural coloured (cream), injection moulded nylon material. For use with water up to 85°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1008502

Grilamid LV-30H FWA natural and black 9225. Grilamid LV-50H FWA natural and black 9225. Grilamid LV-65H FWA natural & black 9225. Grilamid LV-30H FWA grey 9497. Injection moulded, glass fibre reinforced PA12 nylon material. For use with water up to 85°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 0910502

Grilamid LBV-3H WA CL. Natural coloured, injection moulded glass fibre reinforced nylon. For use with hot and cold water up to 85°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1002509

Glass fibre reinforced, injection moulded nylon material (15-50% glass fibres). Grilon BG-15/2 natural and black 9697, Grilon BG-30/2 natural and black 9697, Grilon BG-35/2 natural and black 9697 and Grilon BG-50/2 natural and black 9840. For use with hot and cold water up to 85°C. Glass fibre reinforced, injection moulded nylon material (20-50% glass fibres). Grilamid LV-2H natural and black 9288, Grilamid LV-3H natural and black 9288 and Grilamid LV-5H natural and black 9288. For cold water and hot water use up to 60°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1403500

Grilamid LBV-30H FWA natural & black 9225. Grilamid LBV-50H FWA natural & black 9225. Grilamid LBV-65H FWA natural & black 9225. Glass filled (30%, 50% & 65%), injection moulded nylon material available in natural and black colours. For use with water up to 85°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1002510

Grilamid LKN-5H Natural. Grey coloured, translucent, glass bead reinforced, injection moulded nylon material. For use with cold water only.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1312503

Grivory GVX-5 FWA natural & black 9225. Grivory GVX-6 FWA natural & black 9225. Glass filled (50% & 60%), injection moulded nylon material available in natural and black colours. For use with water up to 23°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1205502

Grilamid LBKN-50H FWA natural (also known as Grilamid XE 4074 natural). Grey coloured, injection moulded nylon material. For use with water up to 85°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1111505

Grilamid grades TR 90 natural & TR 90 LS natural. Injection moulded, translucent, natural coloured nylon material. For use with water up to 85°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1012510

Grilamid, injection moulded nylon 12 material. For use with water up to 60°C. Grilamid L 20 H FWA natural & Grilamid L 20 H FWA black 9225. Grilamid L 25 H FWA natural & Grilamid L 25 H FWA black 9225.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1008501

Grivory HT1V-3 FWA natural and black 9225. Grivory HT1V-4 FWA natural and black 9225. Grivory HT1V-5 FWA natural and black 9225. Grivory HT1V-6 FWA natural and black 9225. Injection moulded, glass reinforced nylon material. The natural coloured Grivory may also be coloured using MB PA66 black BP4750/25 (using the recommended dosage). For use with water up to 85°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1111504

Grivory grades HTV-4X1 natural, HTV-4X1 black 9205, HT1V-4X WA black 9225, HTV-4X1 grey-blue 4637 (dark grey coloured), HTV-4X1 grey 9312 (light grey coloured) & HTV-4X1 grey 9489 (grey coloured). HTV-5X1 natural & HTV-5X1 black 9205. HTV-6X1 natural & HTV-6X1 black 9205. Injection moulded, glass reinforced nylon material. For use with water up to 85°C.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1012501

Grivory, injection moulded, glass reinforced nylon material. For use with water up to 23°C. GV-2H natural & GV-2H black 9915. GV-2 FWA natural & GV-2 FWA black 9225. GV-4H natural & GV-4H black 9915. GV-4 FWA natural & GV-4 FWA black 9225. GV-5H natural & GV-5H black 9915. GV-5 FWA natural, GV-5 FWA black 9225 & Grivory XE 4275 black 9225. GV-6H natural & GV-6H black 9915. GV-6 FWA natural & GV-6 FWA black 9225.

Supplier: EMS-CHEMIE AG

WRAS Approval Number 1008534

Vestamid HT plus M1000 and Vestamid HT plus M1000 black. Natural and black coloured, injection moulded polyamide. For use with water up to 60°C. Vestamid HT plus M1636 and Vestamid HT plus M1636 black. Natural and black coloured, injection moulded polyamide with 60% glass fibre. For use with water up to 60°C.

Supplier: Evonik Degussa GmbH

WRAS Approval Number 1201522

`UV Nylon`. Black coloured, injection moulded nylon sheet material. For use with water up to 85°C

Supplier: Innovative Pipesystems Ltd

WRAS Approval Number 1006516

Durethan BKV 30 F 901510 SR1. Black coloured, injection moulded nylon material. For use with water up to 65°C.

Supplier: Lanxess Deutschland GmbH

WRAS Approval Number 1408503

Durethan BKV 15 F 901510 DUS018. Black coloured, injection moulded PA6 GF 15 material. For use with water up to 85°C.

Supplier: Lanxess Deutschland GmbH

WRAS Approval Number 1402500

Latigloss 66 H2 G/50 Nat.:0003F2 (yellow coloured) & Latigloss 66 H2 G/50 Black:3352F2 (black coloured). Injection moulded polyamide material. For use with water up to 85°C.

Supplier: Lati Industria Termoplastici Spa

WRAS Approval Number 1312513

Aquaforce PA66 G30-01 Schwarz, Aquaforce PA66 G50-01 Schwarz & Aquaforce PA66 G60-01 Schwarz. Black coloured, injection moulded PA66 material. For use with water up to 23°C.

Supplier: Leis Polytechnik GmbH.

WRAS Approval Number 1007530

Nilamid A3H5G6 Black. Black coloured, injection moulded PA66 material. Beginning 1st January 2014 the material will be named Nilamid A3 WR GF30 BK. For use with water up to 85°C.

Supplier: Nilit Plastics Europe Srl.

WRAS Approval Number 1001515

Plustek PA303G6BK16. Black coloured, injection moulded polyamide 66 with 30% glass fibre. For use with hot and cold water up to 85°C. Plustek PA7001G7BK11. Black coloured, injection moulded polyamide 66 with 35% glass fibre. For use with hot and cold water up to 85°C.

Supplier: Polyram Ram-On Industries

WRAS Approval Number 1002525

Plustek PB305G33BK37. Black coloured, injection moulded polyamide 6 reinforced with glass fibre. For use with hot and cold water up to 85°C.

Supplier: Polyram Ram-On Industries

WRAS Approval Number 1104519

Radilon A RV300RKC 106 NAT. Natural coloured, injection moulded nylon material. For use with water up to 85°C.

Supplier: RADICI Plastics Suzhou Co., Ltd.

WRAS Approval Number 1206553

Radilon A RV300RKC 106 Nat (natural coloured), Radilon A RV300RKC 306 NER and RADILON A RV500RKC 306 NER (black coloured), injection moulded, nylon material. For use with water up to 85°C.

Supplier: Radicinovacips Spa

WRAS Approval Number 0912524

Technyl A218W V30 natural & Technyl A218W V30 Black FA. Injection moulded polyamide 6.6 material (reinforced with 30% glass fibre). For use with water up to 85°C.

Supplier: Rhodia Engineering Plastics

WRAS Approval Number 1108514

Lubricomp HAL23-BK1B619 (formerly known as Lubricomp HAL4023 - BK81955). Black coloured, injection moulded, aramid reinforced, PTFE lubricated PA11 composite. For use with water up to 23°C.

Supplier: SABIC Innovative Plastics BV

WRAS Approval Number 1002508

Lamigamid 1200. Yellow coloured, PA 12 nylon material manufactured by open casting. For use with cold water only. sch

Supplier: Schwartz GmbH

WRAS Approval Number 1008542

EC PA66-GF35 black (black coloured) & EC PA66-GF35 natural (translucent, natural coloured). Injection moulded PA66 nylon material. For use with water up to 85°C.

Supplier: Stiebel Eltron Gmbh & Co KG