生产型号:PC-10R-(V22) 22 MFI
生产类别: 热塑性聚合物;;聚碳酸酯(PC)聚碳酸酯,无筋,阻燃剂;
Tristar® PC-10R-(V22) 22 MFI 原材料外包装图:
Tristar® PC-10R-(V22) 22 MFI 原材料内颗粒图:
Tristar® PC-10R-(V22) 22 MFI 原材料概述:
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.20 g/cc | 0.0434 lb/in³ | ASTM D792 | ||
Water Absorption | 0.15 % | 0.15 % | 24 hours at 73°C; ASTM D570 | ||
Melt Flow | 22 g/10 min @Load 1.20 kg, Temperature 300 °C |
22 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 | ||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Rockwell R | 120 | 120 | ASTM D785 | ||
Tensile Strength, Yield | 60.3 MPa @Thickness 3.17 mm |
8750 psi @Thickness 0.125 in |
ASTM D638 | ||
Elongation at Break | 100 % @Thickness 3.17 mm |
100 % @Thickness 0.125 in |
ASTM D638 | ||
Flexural Yield Strength | 89.6 MPa @Thickness 3.17 mm |
13000 psi @Thickness 0.125 in |
ASTM D790 | ||
Flexural Modulus | 2.21 GPa @Thickness 3.17 mm |
321 ksi @Thickness 0.125 in |
ASTM D790 | ||
Izod Impact, Notched | 6.94 J/cm @Thickness 3.17 mm |
13.0 ft-lb/in @Thickness 0.125 in |
ASTM D256 | ||
Electrical Properties | Metric | English | Comments | ||
Arc Resistance | 60 - 120 sec | 60 - 120 sec | PLC 6 | ||
Comparative Tracking Index | 250 - 400 V | 250 - 400 V | PLC 2 | ||
Hot Wire Ignition, HWI | 15 - 30 sec @Thickness 1.50 mm |
15 - 30 sec @Thickness 0.0591 in |
PLC 3 | ||
30 - 60 sec @Thickness 3.00 mm |
30 - 60 sec @Thickness 0.118 in |
PLC 2 | |||
High Amp Arc Ignition, HAI | 60 - 120 arcs @Thickness 3.00 mm |
60 - 120 arcs @Thickness 0.118 in |
PLC 1 | ||
>= 120 arcs @Thickness 1.50 mm |
>= 120 arcs @Thickness 0.0591 in |
PLC 0 | |||
High Voltage Arc-Tracking Rate, HVTR | 80.0 - 150 mm/min | 3.15 - 5.91 in/min | PLC 3 | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear | 70.2 µm/m-°C @Temperature -40.0 - 95.0 °C |
39.0 µin/in-°F @Temperature -40.0 - 203 °F |
Flow; ASTM E831-06 | ||
CTE, linear, Transverse to Flow | 68.4 µm/m-°C @Temperature -40.0 - 95.0 °C |
38.0 µin/in-°F @Temperature -40.0 - 203 °F |
ASTM E831-06 | ||
Deflection Temperature at 1.8 MPa (264 psi) | 132 °C | 270 °F | ASTM D648 | ||
137 °C | 279 °F | ISO 75 | |||
UL RTI, Electrical | 125 °C | 257 °F | |||
UL RTI, Mechanical with Impact | 115 °C | 239 °F | |||
UL RTI, Mechanical without Impact | 125 °C | 257 °F | |||
Flammability, UL94 | V-2 @Thickness 1.50 mm |
V-2 @Thickness 0.0591 in |
|||
Glow Wire Test | 775 °C | 1430 °F | GWIT | ||
960 °C | 1760 °F | GWFI | |||
Processing Properties | Metric | English | Comments | ||
Rear Barrel Temperature | 243 - 260 °C | 470 - 500 °F | |||
Middle Barrel Temperature | 249 - 260 °C | 480 - 500 °F | |||
Front Barrel Temperature | 260 - 271 °C | 500 - 520 °F | |||
Nozzle Temperature | 254 - 271 °C | 490 - 520 °F | |||
Melt Temperature | 260 - 282 °C | 500 - 540 °F | |||
Mold Temperature | 71.1 - 93.3 °C | 160 - 200 °F | |||
Drying Temperature | 121 °C | 250 °F | |||
Dry Time | 3 - 4 hour | 3 - 4 hour | 48 hours max. | ||
Injection Pressure | 51.7 - 124 MPa | 7500 - 18000 psi | |||
Back Pressure | 0.345 - 1.38 MPa | 50.0 - 200 psi | |||
Clamp Pressure | 27.6 - 68.9 MPa | 4000 - 10000 psi | |||
Shot Size | 40 - 60 % | 40 - 60 % | |||
Screw Speed | 40 - 70 rpm | 40 - 70 rpm | |||
De |
|||||
Injection Speed- Edge Gate | Slow to Medium | ||||
Injection Speed- Tab Gate | Medium to Fast | ||||
Injection Speed- Tunnel Gate | Fast |
本公司还提供德国杜邦、美国首诺、美国PLA、日本UMG、基础创新塑料(美国)、美国舒尔曼、美国英威达、美国RTP、美国巴斯夫、上海巴斯夫、德国巴斯夫、马来西亚巴斯夫、 日本东丽、 日本三菱工程、 德国朗盛、德国弗瑞圣塔、荷兰DSM、 美国DSM、 泰国杜邦、河南神马尼龙、三井TPX、意大利泰克尼卡、意大利兰蒂奇、意大利LATI、美国普立万、上海罗地亚、法国罗地亚、日本尤尼卡、深圳东丽、日本旭化成、日本东洋纺织、台湾南亚、惠州南亚、台湾新光、 美国液氮、 台湾太松、日本EMS、瑞士EMS、美国泰科纳、加拿大英威达、加拿大杜邦、新加坡杜邦、新加坡美乐、日本杜邦、等各种工程塑料.........
PTS Tristar PC-10R 10 MFI Polycarbonate With Release
PTS Tristar PC-10R-(14) 14 MFI Polycarbonate With Release PTS Tristar PC-10R-(18) 18 MFI Polycarbonate With Release
PTS Tristar PC-10R-(22) 22 MFI Polycarbonate With Release PTS Tristar PC-10R-(6) 6 MFI Polycarbonate With Release
PTS Tristar PC-10R-(8) 8 MFI Polycarbonate With Release
PTS Tristar PC-10R-(IM) 10 MFI Impact Modified Polycarbonate With Release
PTS Tristar PC-10R-(V) 10 MFI UV Stabilized Polycarbonate With Release
PTS Tristar PC-10R-(V15) 15 MFI UV Stabilized Polycarbonate With Release
PTS Tristar PC-10R-(V18) 18 MFI UV Stabilized Polycarbonate With Release
PTS Tristar PC-10R-(V20) 20 MFI UV Stabilized Polycarbonate with Release
PTS Tristar PC-10R-(V22) 22 MFI UV Stabilized Polycarbonate With Release
PTS Tristar PC-10R-(V6) 6 MFI UV Stabilized Polycarbonate With Release
PTS Tristar PC-10R-(V8) 8 MFI UV Stabilized Polycarbonate With Release
PTS Tristar PC-10R-(VE) 12 MFI UV Stabilized Polycarbonate With Release
PTS Tristar PC-10R-CL 10 MFI Clear Polycarbonate with Release
PTS Tristar PC-10R-CL(15) 15 MFI Clear Polycarbonate with Release
PTS Tristar PC-10R-CL(22) 22 MFI Clear Polycarbonate with Release
上海松翰塑化科技有限公司!本公司承诺,假一赔百!所有产品都是原厂家,原包装一线独家营销!可提供以下报告:COA(产地证明)SGS(检测报告) MSDS(成分报告) FDA(食品安全报告) UL黄卡(出口报告)正规17%的正规发票!欢迎新老客户来电咨询:
联系人:邓小姐
联系电话:13917657923
固定电话:021-51131842
联系QQ:996152797
联系信箱:996152797@qq.com
PTS Tristar PC-10R-CL(6) 6 MFI Clear Polycarbonate with Release