LG化学 PC/ABS LUPOY GP5006B_产品资讯

LG化学 PC/ABS LUPOY GP5006B 分类：塑性聚合物；聚合物；ABS；polycarbonate / ABS合金，unreinforced；polycarbonate（PC）

材料：description：Notes PC/ABS，注射成型，通用，高流动

应用：杂项物品

如图

Physical Properties	Metric	English	Comments
参数表：
Specific Gravity	1.14 g/cc	1.14 g/cc	ASTM D792
Maximum Moisture Content	0.020	0.020	Injection Molding
Linear Mold Shrinkage, Flow	0.0050 - 0.0080 cm/cm @Thickness 3.20 mm	0.0050 - 0.0080 in/in @Thickness 0.126 in	ASTM D955
Melt Flow	6.0 g/10 min @Load 2.16 kg, Temperature 250 °C	6.0 g/10 min @Load 4.76 lb, Temperature 482 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	114	114	ASTM D785
Tensile Strength, Yield	55.9 MPa @Thickness 3.20 mm	8110 psi @Thickness 0.126 in	50mm/min; ASTM D638
Elongation at Break	>= 100 % @Thickness 3.20 mm	>= 100 % @Thickness 0.126 in	50mm/min; ASTM D638
Flexural Yield Strength	90.2 MPa @Thickness 3.20 mm	13100 psi @Thickness 0.126 in	10mm/min; ASTM D790
Flexural Modulus	2.26 GPa @Thickness 3.20 mm	327 ksi @Thickness 0.126 in	10mm/min; ASTM D790
Izod Impact, Notched	>= 2.94 J/cm @Thickness 3.20 mm, Temperature -30.0 °C	>= 5.51 ft-lb/in @Thickness 0.126 in, Temperature -22.0 °F	ASTM D256
	>= 5.69 J/cm @Thickness 3.20 mm, Temperature 23.0 °C	>= 10.7 ft-lb/in @Thickness 0.126 in, Temperature 73.4 °F	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	114 °C @Thickness 6.40 mm	237 °F @Thickness 0.252 in	Unannealed; ASTM D648

Processing Properties	Metric	English	Comments
Rear Barrel Temperature	240 - 270 °C	464 - 518 °F	Injection Molding
Middle Barrel Temperature	245 - 275 °C	473 - 527 °F	Injection Molding
Front Barrel Temperature	245 - 275 °C	473 - 527 °F	Injection Molding
Nozzle Temperature	245 - 275 °C	473 - 527 °F	Injection Molding
Melt Temperature	240 - 270 °C	464 - 518 °F	Injection Molding
Mold Temperature	50.0 - 70.0 °C	122 - 158 °F	Injection Molding
Drying Temperature	80.0 - 100 °C	176 - 212 °F	Injection Molding
Dry Time	4.00 - 6.00 hour	4.00 - 6.00 hour	Injection Molding
Screw Speed	40 - 70 rpm	40 - 70 rpm	Injection Molding

上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。

PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。

欢迎各位客户前来咨询：

联系人：夏先生

手机：13501802636 021 51131842

QQ ：205730283

邮箱：205730283@qq.com