物料数据
|
物理性能 |
额定值 |
单位制 |
测试方法 |
|
比重 |
1.4 |
g/cm3 |
ASTM D792 |
|
收缩率-流动 |
0.10 到 0.30 |
% |
ASTM D955 |
|
吸水率(23℃,24 hr) |
0.2 |
% |
ASTM D570 |
|
机械性能 |
额定值 |
单位制 |
测试方法 |
|
拉伸模量 |
4480 |
MPa |
ASTM D638 |
|
抗张强度(屈服) |
55.2 |
MPa |
ASTM D638 |
|
伸长率(断裂) |
3 |
% |
ASTM D638 |
|
弯曲模量 |
4140 |
MPa |
ASTM D790 |
|
弯曲强度(屈服) |
82.7 |
MPa |
ASTM D790 |
|
冲击性能 |
额定值 |
单位制 |
测试方法 |
|
悬壁梁缺口冲击强度(3.18 mm) |
59 |
J/m |
ASTM D256 |
|
无缺口悬臂梁冲击(3.18 mm) |
320 |
J/m |
ASTM D256 |
|
热性能 |
额定值 |
单位制 |
测试方法 |
| 参数： | |||
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.14 g/cc | 1.14 g/cc | ASTM D792 |
| Maximum Moisture Content | 0.020 | 0.020 | Injection Molding |
| Linear Mold Shrinkage, Flow | 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm |
0.0050 - 0.0080 in/in @Thickness 0.126 in |
ASTM D955 |
| Melt Flow | 5.5 g/10 min @Load 2.16 kg, Temperature 250 °C |
5.5 g/10 min @Load 4.76 lb, Temperature 482 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 114 | 114 | ASTM D785 |
| Tensile Strength, Yield | 56.9 MPa @Thickness 3.20 mm |
8250 psi @Thickness 0.126 in |
50mm/min; ASTM D638 |
| Elongation at Break | >= 100 % @Thickness 3.20 mm |
>= 100 % @Thickness 0.126 in |
50mm/min; ASTM D638 |
| Flexural Yield Strength | 86.3 MPa @Thickness 3.20 mm |
12500 psi @Thickness 0.126 in |
10mm/min; ASTM D790 |
| Flexural Modulus | 2.26 GPa @Thickness 3.20 mm |
327 ksi @Thickness 0.126 in |
10mm/min; ASTM D790 |
| Izod Impact, Notched | >= 5.39 J/cm @Thickness 3.20 mm, Temperature -30.0 °C |
>= 10.1 ft-lb/in @Thickness 0.126 in, Temperature -22.0 °F |
ASTM D256 |
| >= 7.16 J/cm @Thickness 3.20 mm, Temperature 23.0 °C |
>= 13.4 ft-lb/in @Thickness 0.126 in, Temperature 73.4 °F |
ASTM D256 | |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 114 °C @Thickness 6.40 mm |
237 °F @Thickness 0.252 in |
Unannealed; ASTM D648 |
| Processing Properties | Metric | English | Comments |
| Rear Barrel Temperature | 240 - 270 °C | 464 - 518 °F | Injection Molding |
| Middle Barrel Temperature | 245 - 275 °C | 473 - 527 °F | Injection Molding |
| Front Barrel Temperature | 245 - 275 °C | 473 - 527 °F | Injection Molding |
| Nozzle Temperature | 245 - 275 °C | 473 - 527 °F | Injection Molding |
| Melt Temperature | 250 - 270 °C | 482 - 518 °F | Injection Molding |
| Mold Temperature | 50.0 - 70.0 °C | 122 - 158 °F | Injection Molding |
| Drying Temperature | 80.0 - 100 °C | 176 - 212 °F | Injection Molding |
| Dry Time | 4.00 - 6.00 hour | 4.00 - 6.00 hour | Injection Molding |
| Screw Speed | 40 - 70 rpm | 40 - 70 rpm | Injection Molding |
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636 021 51131842
QQ ：205730283
邮 箱 ：205730283@qq.com