特点:
1、综合性能较好,冲击强度较高,化学稳定性,电性能良好.
2、与372有机玻璃的熔接性良好,制成双色塑件,且可表面镀铬,喷漆处理.
3、有高抗冲、高耐热、阻燃、增强、透明等级别。
4、流动性比HIPS差一点,比PMMA、PC等好,柔韧性好。
5、用途:适于制作一般机械零件,减磨耐磨零件,传动零件和电讯零件.
6、同PVC(聚氯乙烯)一样在屈折处会出现白化现象。
典型应用范围:
汽车内外饰:仪表板,饰柱,仪表前盖,格栅,内外饰件 2.商务设备机壳和内置部件:笔记本/台式电脑,复印机,打印机,绘图仪,显示器 3.电信,移动电话外壳,附件以及智能卡(SIM卡): 4.电器产品,电子产品外壳,电表罩和壳体,家用开关,插头和插座,电缆电线管道 5.家用电器,如洗衣机,吹风机,微波炉内外部件等。
物性表: | |||
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.33 g/cc | 0.0480 lb/in³ | ASTM D792 |
1.33 g/cc | 0.0480 lb/in³ | ISO 1183 | |
Moisture Absorption | 0.200 % | 0.200 % | 23°C / 50% RH; ISO 62 |
Linear Mold Shrinkage, Flow | 0.0059 cm/cm | 0.0059 in/in | SABIC Method |
Linear Mold Shrinkage, Transverse | 0.0064 cm/cm | 0.0064 in/in | SABIC Method |
Mechanical Properties | Metric | English | Comments |
Tensile Strength at Break | 47.0 MPa | 6820 psi | Type I, 5 mm/min; ASTM D638 |
47.0 MPa | 6820 psi | ISO 527 | |
Elongation at Break | 2.9 % | 2.9 % | Type I, 5 mm/min; ASTM D638 |
3.1 % | 3.1 % | 5 mm/min; ISO 527 | |
6.4 % | 6.4 % | Flexural Strain, break, 2 mm/min; ISO 178 | |
Tensile Modulus | 3.80 GPa | 551 ksi | 1 mm/min; ISO 527 |
3.90 GPa | 566 ksi | 5 mm/min; ASTM D638 | |
Flexural Strength | 77.0 MPa | 11200 psi | brk, 1.3 mm/min, 50 mm span; ASTM D790 |
Flexural Yield Strength | 79.0 MPa | 11500 psi | 1.3 mm/min, 50 mm span; ASTM D790 |
87.0 MPa | 12600 psi | 2 mm/min; ISO 178 | |
Flexural Modulus | 3.60 GPa | 522 ksi | 1.3 mm/min, 50 mm span; ASTM D790 |
Izod Impact, Notched | 1.17 J/cm | 2.19 ft-lb/in | ASTM D256 |
0.660 J/cm @Temperature -30.0 °C |
1.24 ft-lb/in @Temperature -22.0 °F |
ASTM D256 | |
Izod Impact, Unnotched | 7.90 J/cm | 14.8 ft-lb/in | ASTM D4812 |
6.04 J/cm @Temperature -30.0 °C |
11.3 ft-lb/in @Temperature -22.0 °F |
ASTM D4812 | |
Izod Impact, Notched (ISO) | 11.0 kJ/m² | 5.23 ft-lb/in² | 80*10*4; ISO 180/1A |
7.00 kJ/m² @Temperature -30.0 °C |
3.33 ft-lb/in² @Temperature -22.0 °F |
80*10*4; ISO 180/1A | |
Izod Impact, Unnotched (ISO) | 70.0 kJ/m² | 33.3 ft-lb/in² | 80*10*4; ISO 180/1U |
52.0 kJ/m² @Temperature -30.0 °C |
24.7 ft-lb/in² @Temperature -22.0 °F |
80*10*4; ISO 180/1U | |
Charpy Impact, Notched | 1.10 J/cm² | 5.23 ft-lb/in² | ISO 179/2C |
Dart Drop, Total Energy | 19.0 J @Temperature 23.0 °C |
14.0 ft-lb @Temperature 73.4 °F |
ASTM D3763 |
Electrical Properties | Metric | English | Comments |
Volume Resistivity | 1.00e+6 - 1.00e+9 ohm-cm | 1.00e+6 - 1.00e+9 ohm-cm | ASTM D257 |
Surface Resistance | 10000 - 1.00e+6 ohm | 10000 - 1.00e+6 ohm | ASTM D257 |
Shielding Effectiveness | 30 - 38 dB @Thickness 3.00 mm |
30 - 38 dB @Thickness 0.118 in |
SABIC Method |
Thermal Properties | Metric | English | Comments |
CTE, linear, Parallel to Flow | 31.0 µm/m-°C @Temperature 23.0 - 60.0 °C |
17.2 µin/in-°F @Temperature 73.4 - 140 °F |
ISO 11359-2 |
32.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
17.8 µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 | |
CTE, linear, Transverse to Flow | 71.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
39.4 µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 |
74.0 µm/m-°C @Temperature 23.0 - 60.0 °C |
41.1 µin/in-°F @Temperature 73.4 - 140 °F |
ISO 11359-2 | |
Deflection Temperature at 1.8 MPa (264 psi) | 124 °C | 255 °F | Flatw 80*10*4 sp=64mm; ISO 75/Af |
122 °C @Thickness 3.20 mm |
252 °F @Thickness 0.126 in |
unannealed; ASTM D648 | |
Vicat Softening Point | 143 °C | 289 °F | Rate B/50; ASTM D1525 |
143 °C | 289 °F | Rate B/50; ISO 306 | |
144 °C | 291 °F | Rate B/120; ISO 306 | |
144 °C | 291 °F | Rate A/50; ASTM D1525 |
上海松翰塑化科技有限公司,供应原料,品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询:
联系人: 夏先生
手 机:13501802636
QQ :205730283
邮 箱 :205730283@qq.com