PA6 BFR200Y PA6,阻燃，注塑成型、_产品资讯

PA6 BFR200Y 聚酰胺俗称尼龙（Nylon），英文名称Polyamide（简称PA），是分子主链上含有重复酰胺基团—[NHCO]—的热塑性树脂总称。包括脂肪族PA，脂肪—芳香族PA和芳香族PA。其中，脂肪族PA品种多，产量大，应用广泛，其命名由合成单体具体的碳原子数而定。

颗粒图：

、

用途：

广泛应用于机械、仪器仪表、汽车部件、电子电气、铁路、家电、通讯、纺机、体育休闲用品、油管、油箱及一些精密工程制品。

电子电器：连接器、卷线轴、计时器、护盖断路器、开关壳座。

汽车：散热风扇、门把、油箱盖、进气隔栅、水箱护盖、灯座。

工业零件：椅座、自行车输框、溜冰鞋底座、纺织梭、踏板、滑输。

上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。

PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。

欢迎各位客户前来咨询：

联系人：夏先生

手机：13501802636

QQ ：205730283

邮箱：205730283@qq.com

物性表:

Physical Properties	Metric	English	Comments

Density	1.18 g/cc	0.0426 lb/in³	ISO 1183
Moisture Absorption	2.20 % @Temperature 23.0 °C	2.20 % @Temperature 73.4 °F	50% RH; ISO 62
Water Absorption at Saturation	9.0 % @Temperature 23.0 °C	9.0 % @Temperature 73.4 °F	ISO 62
Linear Mold Shrinkage, Flow	0.0080 - 0.012 cm/cm	0.0080 - 0.012 in/in	on Tensile Bar; E2P method

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	120	120	ISO 2039-2
Tensile Strength, Yield	78.0 MPa	11300 psi	50 mm/min; ISO 527
Elongation at Break	5.6 %	5.6 %	50 mm/min; ISO 527
Elongation at Yield	3.7 %	3.7 %	50 mm/min; ISO 527
Tensile Modulus	3.40 GPa	493 ksi	1 mm/min; ISO 527
Flexural Yield Strength	105 MPa	15200 psi	2 mm/min; ISO 178
Flexural Modulus	3.10 GPa	450 ksi	2 mm/min; ISO 178
Izod Impact, Notched (ISO)	4.00 kJ/m² @Temperature -20.0 °C	1.90 ft-lb/in² @Temperature -4.00 °F	80x10x4; ISO 180/1A
	5.00 kJ/m² @Temperature 23.0 °C	2.38 ft-lb/in² @Temperature 73.4 °F	80x10x4; ISO 180/1A
Charpy Impact Unnotched	>= 10.0 J/cm² @Temperature 23.0 °C	>= 47.6 ft-lb/in² @Temperature 73.4 °F	Edgew 80x10x4 sp=62; ISO 179/1eU
	>= 10.0 J/cm² @Temperature -30.0 °C	>= 47.6 ft-lb/in² @Temperature -22.0 °F	Edgew 80x10x4 sp=62; ISO 179/1eU
Charpy Impact, Notched	0.300 J/cm² @Temperature -30.0 °C	1.43 ft-lb/in² @Temperature -22.0 °F	Edgew 80x10x4 sp=62; ISO 179/1eA
	0.500 J/cm² @Temperature 23.0 °C	2.38 ft-lb/in² @Temperature 73.4 °F	Edgew 80x10x4 sp=62; ISO 179/1eA

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+16 ohm-cm	>= 1.00e+16 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+16 ohm	>= 1.00e+16 ohm	IEC 60093
Dielectric Constant	3.0 @Frequency 1.00e+6 Hz	3.0 @Frequency 1.00e+6 Hz	IEC 60250
	3.3 @Frequency 50.0 - 60.0 Hz	3.3 @Frequency 50.0 - 60.0 Hz	IEC 60250
Dielectric Strength	15.0 kV/mm @Thickness 3.20 mm	381 kV/in @Thickness 0.126 in	in oil; IEC 60243-1
Dissipation Factor	0.0078 @Frequency 50.0 - 60.0 Hz	0.0078 @Frequency 50.0 - 60.0 Hz	IEC 60250
	0.019 @Frequency 1.00e+6 Hz	0.019 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	75.0 µm/m-°C @Temperature 23.0 - 60.0 °C	41.7 µin/in-°F @Temperature 73.4 - 140 °F	ISO 11359-2
CTE, linear, Transverse to Flow	190 µm/m-°C @Temperature 23.0 - 60.0 °C	106 µin/in-°F @Temperature 73.4 - 140 °F	ISO 11359-2
Hot Ball Pressure Test	123 - 127 °C	253 - 261 °F	IEC 60695-10-2
Deflection Temperature at 0.46 MPa (66 psi)	190 °C	374 °F	Edgew 120x10x4, sp=100 mm; ISO 75/Be
Deflection Temperature at 1.8 MPa (264 psi)	75.0 °C	167 °F	Edgew 120x10x4, sp=100 mm; ISO 75/Ae
Vicat Softening Point	200 °C	392 °F	B/120; ISO 306
	205 °C	401 °F	B/50; ISO 306
UL RTI, Electrical	130 °C	266 °F
UL RTI, Mechanical with Impact	90.0 °C	194 °F
UL RTI, Mechanical without Impact	100 °C	212 °F
Flammability, UL94	V-0 @Thickness 0.750 mm	V-0 @Thickness 0.0295 in
Oxygen Index	32 %	32 %	ISO 4589
Glow Wire Test	960 °C @Thickness 2.00 mm	1760 °F @Thickness 0.0787 in	IEC 60695-2-12

Processing Properties	Metric	English	Comments
Zone 1	240 - 250 °C	464 - 482 °F
Zone 2	250 - 260 °C	482 - 500 °F
Zone 3	250 - 270 °C	482 - 518 °F
Melt Temperature	250 - 270 °C	482 - 518 °F
Mold Temperature	50.0 - 90.0 °C	122 - 194 °F
Drying Temperature	80.0 °C @Time 14400 sec	176 °F @Time 4.00 hour
Moisture Content	0.20 %	0.20 %