TPE 4660 NC 原料图片
TPE 4660 NC 个别产品图片
TPE 4660 NC 物性表：
应用领域
TPE 4660 NC 个别产品图片
TPE 4660 NC 物性表：
| Mechanical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Hardness, Shore A | 54 | 54 | After 7 days at 257°F (125°C); ASTM D573; ISO 188 | ||
| 57 | 57 | ASTM D2240; ISO 48 | |||
| Tensile Strength, Ultimate | 8.27 MPa | 1200 psi | After 7 days at 257°F (125°C); ASTM D573; ISO 188 | ||
| 8.446 MPa | 1225 psi | ASTM D412; ISO 37 | |||
| Elongation at Break | 400 % | 400 % | After 7 days at 257°F (125°C); ASTM D573; ISO 188 | ||
| 440 % | 440 % | ASTM D412; ISO 37 | |||
| 100% Modulus | 0.00255 GPa | 0.370 ksi | After 7 days at 257°F (125°C); ASTM D573; ISO 188 | ||
| 0.00262 GPa | 0.380 ksi | ASTM D412; ISO 37 | |||
| Graves Tear Strength | 29.8 kN/m | 170 pli | (Die C) At 75°F (24°C); ASTM D624 | ||
| Taber Abrasion, mg/1000 Cycles | 4.0 | 4.0 | Cs-17 Wheel, 1000 g Load; ASTM D3389 | ||
| Compression Set | 16 % | 16 % | After 22 Hr at 75°F (24°C); ASTM D395; ISO 815 | ||
| 72 % @Temperature 100 °C |
72 % @Temperature 212 °F |
22 hrs.; ASTM D395; ISO 815 | |||
| Tensile Set | 7.0 % | 7.0 % | ASTM D412 | ||
| Torsional Stiffness | 1.7225 MPa | 249.83 psi | At 75°F (24°C); ASTM D1043 | ||
| 6.89 MPa | 999 psi | At -4°F (-20°C); ASTM D1043 | |||
| Thermal Properties | Metric | English | Comments | ||
| Brittleness Temperature | -68.9 °C | -92.0 °F | ASTM D746; ISO 812 | ||
| Clash Berg Stiffness Temperature | -40.0 °C | -40.0 °F | At 10,000 psi (69 Mpa); ASTM D1043 | ||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 166 °C | 330 °F | |||
| De |
|||||
| Fluid Resistance - Volume Change, % (ASTM D471) | 13 | After 7 Days in ASTM Ref. Fuel No. B at 75°F (24°C) | |||
| 14 | After 7 Days in IRM 903 Oil No.3 at 212°F (100°C) | ||||
| -19 | After 7 Days in ASTM Oil No.1 at 212°F (100°C) | ||||
| 9 | After 7 Days in Water at 212°F (100°C | ||||
窗户和门的风雨（和其它复杂轮廓挤出）
软手柄和手柄
模压密封件和垫圈
注射成型和共注塑件
吹塑成型零件
管道和软管
电线电缆护套 上海松翰塑化科技有限公司供应产品，品质一流，TPV种类齐全。 公司理念你的要求就是我们的追求 。咨询人夏先生 电话：13751253137 QQ：205730283 我公司将给你最专业产品加工工艺指导及帮你解决加工工艺难题 欢迎你的咨询