公司的Hostaform®27242 xap2™ POM,冲击改性
类别:聚合物;热塑性;聚甲醛(POM);乙缩醛共聚物,影响改性
材质说明:易流动,冲击改性注塑级,具有良好的低温冲击强度和良好的焊接线强度和减少排放。根据VDA 275<5毫克/公斤的排放
物性表:Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.35 g/cc | 0.0488 lb/in³ | ISO 1183 | ||
Mechanical Properties | Metric | English | Comments | ||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | 50mm/min; ISO 527-2/1A | ||
Elongation at Break | 40 % | 40 % | 50mm/min; ISO 527-2/1A | ||
Elongation at Yield | 8.5 % | 8.5 % | 50mm/min; ISO 527-2/1A | ||
Tensile Modulus | 2.20 GPa | 319 ksi | 1mm/min; ISO 527-2/1A | ||
Charpy Impact Unnotched | 13.0 J/cm² | 61.9 ft-lb/in² | ISO 179/1eU | ||
Charpy Impact, Notched | 0.700 J/cm² | 3.33 ft-lb/in² | ISO 179/1eA | ||
0.600 J/cm² @Temperature 30.0 °C |
2.86 ft-lb/in² @Temperature 86.0 °F |
ISO 179/1eA | |||
Processing Properties | Metric | English | Comments | ||
Processing Temperature | 20.0 - 30.0 °C | 68.0 - 86.0 °F | hopper | ||
60.0 - 80.0 °C | 140 - 176 °F | cavity | |||
Feed Temperature | 60.0 - 80.0 °C | 140 - 176 °F | |||
Zone 1 | 170 - 180 °C | 338 - 356 °F | |||
Zone 2 | 180 - 190 °C | 356 - 374 °F | |||
Zone 3 | 190 - 200 °C | 374 - 392 °F | |||
Zone 4 | 190 - 200 °C | 374 - 392 °F | |||
Die Temperature | 190 - 200 °C | 374 - 392 °F | |||
Melt Temperature | 190 - 200 °C | 374 - 392 °F | |||
Drying Temperature | 100 - 120 °C | 212 - 248 °F | |||
Dry Time | 3 - 4 hour | 3 - 4 hour | |||
Moisture Content | 0.15 % | 0.15 % | Necessary low maximum | ||
Injection Pressure | 60.0 - 120 MPa | 8700 - 17400 psi | |||
Hold Pressure | 60.0 - 120 MPa | 8700 - 17400 psi | |||
Back Pressure | <= 2.00 MPa | <= 290 psi | |||
Screw Speed | 70 rpm @Diameter 55.0 mm |
70 rpm @Diameter 2.17 in |
|||
100 rpm @Diameter 40.0 mm |
100 rpm @Diameter 1.57 in |
||||
150 rpm @Diameter 25.0 mm |
150 rpm @Diameter 0.984 in |
||||
Hot-Working Temperature | 190 - 200 °C | 374 - 392 °F | |||
De |
|||||
Injection speed | slow-medium | ||||
Melt volume rate (MVR), cm³/10min | 16 | ||||
MVR test load, kg | 2.16 | ||||
MVR test temperature, °C | 190 | ||||
Processing conditions acc. ISO | 9988-2 |
上海松翰塑化科技有限公司!本公司承诺,假一赔百!所有产品都是原厂家,原包装一线独家营销!
我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是QQ与我联系!
欢迎新老客户来电或QQ咨询;
联系人:李先生
联系电话;13636696005
联系QQ;1020580970
联系邮箱;1020580970@qq.com