| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.34 g/cc | 1.34 g/cc | ASTM D792 |
| Water Absorption | 0.21 % @Temperature 22.8 °C, Time 86400 sec |
0.21 % @Temperature 73.0 °F, Time 24.0 hour |
ASTM D570 |
| Water Absorption at Saturation | 1.2 % @Temperature 22.8 °C |
1.2 % @Temperature 73.0 °F |
ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 114 | 114 | ASTM D785 |
| Tensile Strength at Break | 114 MPa @Temperature 22.8 °C |
16600 psi @Temperature 73.0 °F |
ASTM D638 |
| Elongation at Break | 6.0 % @Temperature 22.8 °C |
6.0 % @Temperature 73.0 °F |
ASTM D638 |
| Elongation at Yield | 5.0 % | 5.0 % | ASTM D638 |
| Tensile Modulus | 4.48 GPa @Temperature 22.8 °C |
650 ksi @Temperature 73.0 °F |
ASTM D638 |
| Flexural Strength | 193 MPa @Temperature 22.8 °C |
28000 psi @Temperature 73.0 °F |
ASTM D790 |
| Flexural Modulus | 4.48 GPa @Temperature 22.8 °C |
650 ksi @Temperature 73.0 °F |
ASTM D790 |
| Compressive Strength | 152 MPa | 22000 psi | ASTM D695 |
| Compressive Modulus | 3.73 GPa | 541 ksi | ASTM D695 |
| Shear Strength | 89.6 MPa | 13000 psi | Ultimate |
| Izod Impact, Notched | 0.587 J/cm | 1.10 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+17 ohm-cm | 1.00e+17 ohm-cm | 1/16''; ASTM D257 |
| Dielectric Constant | 3.5 @Frequency 1000 Hz |
3.5 @Frequency 1000 Hz |
50% RH; ASTM D150 |
| Dielectric Strength | 27.6 kV/mm | 700 kV/in | In Oil; ASTM D149 |
| Dissipation Factor | 0.0014 @Frequency 1000 Hz, Temperature 22.8 °C |
0.0014 @Frequency 1000 Hz, Temperature 73.0 °F |
50% RH; ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear, Parallel to Flow | 32.4 µm/m-°C | 18.0 µin/in-°F | ASTM D696 |
| Thermal Conductivity | 0.176 W/m-K | 1.22 BTU-in/hr-ft²-°F | ASTM D2214 |
| Deflection Temperature at 0.46 MPa (66 psi) | 210 °C | 410 °F | 1/4''; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 207 °C | 405 °F | 1/4''; ASTM D648 |
| Flammability, UL94 | V-0 | V-0 | |
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636 021 51131842
QQ ：205730283
邮 箱 ：205730283@qq.com
PEI 2100 图：
