| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.32 g/cc | 0.0477 lb/in³ | ASTM D792 |
| Moisture Absorption | 4.05 % | 4.05 % | 50% RH, 24 hrs; ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.017 cm/cm @Time 86400 sec |
0.017 in/in @Time 24.0 hour |
ASTM D955 |
| 0.0174 cm/cm @Time 86400 sec |
0.0174 in/in @Time 24.0 hour |
ISO 294 | |
| Linear Mold Shrinkage, Transverse | 0.018 cm/cm @Time 86400 sec |
0.018 in/in @Time 24.0 hour |
ASTM D955 |
| 0.0183 cm/cm @Time 86400 sec |
0.0183 in/in @Time 24.0 hour |
ISO 294 | |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 24.0 MPa | 3480 psi | ASTM D638 |
| 31.0 MPa | 4500 psi | ISO 527 | |
| Tensile Strength, Yield | 40.0 MPa | 5800 psi | ASTM D638 |
| 41.0 MPa | 5950 psi | ISO 527 | |
| Elongation at Break | 52.4 % | 52.4 % | ISO 527 |
| 75.5 % | 75.5 % | ASTM D638 | |
| Elongation at Yield | 14.6 % | 14.6 % | ISO 527 |
| 18.1 % | 18.1 % | ASTM D638 | |
| Tensile Modulus | 1.11 GPa | 161 ksi | 1 mm/min; ISO 527 |
| 1.50 GPa | 218 ksi | 50 mm/min; ASTM D638 | |
| Flexural Strength | 35.0 MPa | 5080 psi | ISO 178 |
| 46.0 MPa | 6670 psi | ASTM D790 | |
| Flexural Modulus | 1.35 GPa | 196 ksi | ISO 178 |
| 1.38 GPa | 200 ksi | ASTM D790 | |
| Izod Impact, Notched | 1.60 J/cm | 3.00 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched | NB | NB | ASTM D4812 |
| Izod Impact, Notched (ISO) | 14.0 kJ/m² | 6.66 ft-lb/in² | 80*10*4; ISO 180/1A |
| Izod Impact, Unnotched (ISO) | NB | NB | 80*10*4; ISO 180/1U |
| Dart Drop, Total Energy | 22.0 J | 16.2 ft-lb | Instrumented Impact Energy @ peak; ASTM D3763 |
| Impact Test | 16.0 J | 11.8 ft-lb | Multiaxial Impact; ISO 6603 |
| Electrical Properties | Metric | English | Comments |
| Surface Resistance | 1.00e+9 - 1.00e+11 ohm | 1.00e+9 - 1.00e+11 ohm | ASTM D257 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear, Parallel to Flow | 124 µm/m-°C @Temperature -40.0 - 40.0 °C |
68.9 µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 |
| 124 µm/m-°C @Temperature -40.0 - 40.0 °C |
68.9 µin/in-°F @Temperature -40.0 - 104 °F |
ISO 11359-2 | |
| CTE, linear, Transverse to Flow | 139 µm/m-°C @Temperature -40.0 - 40.0 °C |
77.2 µin/in-°F @Temperature -40.0 - 104 °F |
ASTM E 831 |
| 139 µm/m-°C @Temperature -40.0 - 40.0 °C |
77.2 µin/in-°F @Temperature -40.0 - 104 °F |
ISO 11359-2 | |
| Deflection Temperature at 1.8 MPa (264 psi) | 64.0 °C | 147 °F | Flatw 80*10*4 sp=64mm; ISO 75/Af |
| 78.0 °C @Thickness 3.20 mm |
172 °F @Thickness 0.126 in |
unannealed; ASTM D648 |
|
上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
主要销售：PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是QQ与我联系！
欢迎新老客户来电或QQ咨询：
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com