塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. 杜邦高性能聚合物尼龙330 NC010

杜邦高性能聚合物尼龙330 NC010

杜邦高性能聚合物®Zytel尼龙330 NC010 类别：聚合物；热塑性塑料；尼龙 注：非增强尼龙材料 Zytel 330 NC010是一种无定形透明聚酰胺树脂的特性。
 物性表：

 
Physical Properties Metric English Comments
Density  1.18 g/cc 0.0426 lb/in³ DAM; ISO 1183
Water Absorption  5.8 %
@Thickness 2.00 mm		 5.8 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Viscosity   44000 cP
@Shear Rate 5000 1/s,
Temperature 320 °C		 44000 cP
@Shear Rate 5000 1/s,
Temperature 608 °F		 ISO 11403-1 -2
  70000 cP
@Shear Rate 500 1/s,
Temperature 320 °C		 70000 cP
@Shear Rate 500 1/s,
Temperature 608 °F		 ISO 11403-1 -2
  72000 cP
@Shear Rate 5000 1/s,
Temperature 300 °C		 72000 cP
@Shear Rate 5000 1/s,
Temperature 572 °F		 ISO 11403-1 -2
  122000 cP
@Shear Rate 5000 1/s,
Temperature 280 °C		 122000 cP
@Shear Rate 5000 1/s,
Temperature 536 °F		 ISO 11403-1 -2
  127000 cP
@Shear Rate 500 1/s,
Temperature 300 °C		 127000 cP
@Shear Rate 500 1/s,
Temperature 572 °F		 ISO 11403-1 -2
  243000 cP
@Shear Rate 500 1/s,
Temperature 280 °C		 243000 cP
@Shear Rate 500 1/s,
Temperature 536 °F		 ISO 11403-1 -2
Viscosity Test  80 cm³/g 80 cm³/g DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.0050 cm/cm 0.0050 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.0040 cm/cm 0.0040 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength, Yield  97.0 MPa 14100 psi DAM; ISO 527-1/-2
Elongation at Break  >= 50 % >= 50 % DAM; Nominal; ISO 527-1/-2
Elongation at Yield  6.0 % 6.0 % DAM; ISO 527-1/-2
Tensile Modulus  1.30 GPa 189 ksi 50%RH; ISO 527-1/-2
  2.40 GPa 348 ksi DAM; ISO 527-1/-2
  0.000701 GPa
@Temperature 170 °C		 0.102 ksi
@Temperature 338 °F		 50%RH; Dynamic; ISO 11403-1 -2
  0.00208 GPa
@Temperature 170 °C		 0.302 ksi
@Temperature 338 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.0387 GPa
@Temperature 110 °C		 5.61 ksi
@Temperature 230 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.27 GPa
@Temperature 30.0 °C		 184 ksi
@Temperature 86.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.40 GPa
@Temperature -20.0 °C		 202 ksi
@Temperature -4.00 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.4027 GPa
@Temperature 110 °C		 203.44 ksi
@Temperature 230 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.58 GPa
@Temperature 30.0 °C		 230 ksi
@Temperature 86.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.70 GPa
@Temperature -70.0 °C		 246 ksi
@Temperature -94.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.72 GPa
@Temperature -20.0 °C		 250 ksi
@Temperature -4.00 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.96 GPa
@Temperature -100 °C		 284 ksi
@Temperature -148 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.06 GPa
@Temperature -70.0 °C		 299 ksi
@Temperature -94.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.24 GPa
@Temperature -100 °C		 325 ksi
@Temperature -148 °F		 DAM; Dynamic; ISO 11403-1 -2
Izod Impact, Notched (ISO)  8.00 kJ/m² 3.81 ft-lb/in² DAM; ISO 180/1A
Charpy Impact Unnotched  18.0 J/cm² 85.7 ft-lb/in² DAM; ISO 179/1eU
  NB NB 50%RH; ISO 179/1eU
  18.0 J/cm²
@Temperature -30.0 °C		 85.7 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
  23.0 J/cm²
@Temperature -40.0 °C		 109 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 179/1eU
Charpy Impact, Notched  0.990 J/cm² 4.71 ft-lb/in² DAM; ISO 179/1eA
  1.20 J/cm² 5.71 ft-lb/in² 50%RH; ISO 179/1eA
  0.450 J/cm²
@Temperature -40.0 °C		 2.14 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 179/1eA
  0.450 J/cm²
@Temperature -30.0 °C		 2.14 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
Puncture Energy   37.0 J
@Load 377 kg		 27.3 ft-lb
@Load 832 lb		 50%RH; ISO 6603-2
  70.0 J
@Load 561 kg		 51.6 ft-lb
@Load 1240 lb		 DAM; ISO 6603-2
  19.0 J
@Load 316 kg,
Temperature -30.0 °C		 14.0 ft-lb
@Load 697 lb,
Temperature -22.0 °F		 50%RH; ISO 6603-2
  47.0 J
@Load 438 kg,
Temperature -30.0 °C		 34.7 ft-lb
@Load 967 lb,
Temperature -22.0 °F		 DAM; ISO 6603-2
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+15 ohm-cm 1.00e+15 ohm-cm DAM; IEC 60093
  1.00e+15 ohm-cm 1.00e+15 ohm-cm 50%RH; IEC 60093
Dielectric Constant   3.7
@Frequency 1.00e+6 Hz		 3.7
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  3.8
@Frequency 1.00e+6 Hz		 3.8
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  4.1
@Frequency 100 Hz		 4.1
@Frequency 100 Hz		 DAM; IEC 60250
  4.3
@Frequency 100 Hz		 4.3
@Frequency 100 Hz		 50%RH; IEC 60250
Dielectric Strength  28.0 kV/mm 711 kV/in 50%RH; IEC 60243-1
  29.0 kV/mm 737 kV/in DAM; IEC 60243-1
Dissipation Factor   0.020
@Frequency 100 Hz		 0.020
@Frequency 100 Hz		 DAM; IEC 60250
  0.020
@Frequency 100 Hz		 0.020
@Frequency 100 Hz		 50%RH; IEC 60250
  0.020
@Frequency 1.00e+6 Hz		 0.020
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  0.020
@Frequency 1.00e+6 Hz		 0.020
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
Comparative Tracking Index  600 V 600 V DAM; IEC 60112
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  62.0 µm/m-°C 34.4 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  60.0 µm/m-°C 33.3 µin/in-°F DAM; ISO 11359-1/-2
Specific Heat Capacity  2.46 J/g-°C 0.588 BTU/lb-°F  
Thermal Conductivity  0.220 W/m-K 1.53 BTU-in/hr-ft²-°F of melt
Deflection Temperature at 0.46 MPa (66 psi)  127 °C 261 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  123 °C 253 °F DAM; ISO 75-1/-2
Glass Transition Temp, Tg  140 °C 284 °F DAM; 10°C/min; ISO 11357-1/-2
Flammability, UL94   HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 DAM; IEC 60695-11-10
  V-2
@Thickness 0.900 mm		 V-2
@Thickness 0.0354 in		 DAM; IEC 60695-11-10
 
Optical Properties Metric English Comments
Transmission, Visible  88 % 88 % ISO 13468-1 -2
 
Descriptive Properties
Delivery form Pellets  
Part Marking Code >PA< ISO 11469
Processing Injection Moulding  
Regional Availability Europe  
  Near East/Africa  
  North America  
  South and Central America  
Resin Identification PA  
Special characteristics Heat stabilised or stable to heat  
  Transparent
图：

上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
主要销售：PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是QQ与我联系！
欢迎新老客户来电或QQ咨询：
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-39661.html

免责声明: 本文 杜邦高性能聚合物尼龙330 NC010 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4