注意事项:
常用于镀金品,其注意事项如下:
(1)料管温度宜高,约210-230℃
(2)射出温度宜慢(用二次加压法),射出压力宜低,否则和压力集中.
(3)不可用离模剂.
(4)以背压控制收缩下陷及熔接线之流痕.
(5)成品表面不可有创痕.
本公司供应其他ABS型号如下：
LNP Thermocomp AF008 ABS SABIC Innovative Plastics
LNP Thermocomp AFB42 ABS SABIC Innovative Plastics
LNP Thermocomp AH0230A ABS SABIC Innovative Plastics
LNP Thermocomp AH0400A ABS SABIC Innovative Plastics
LNP Thermocomp AW00A ABS SABIC Innovative Plastics
LNP Thermocomp AX02749X ABS SABIC Innovative Plastics
LNP Thermocomp AX04518 ABS SABIC Innovative Plastics