添加剂: 冲击改性剂
特性: 冲击改性
用途: 开关,外壳,线轴
外观: 不透明
加工方法: 注射成型
多点数据: Compressive Stress vs. Strain (ASTM D695),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 比重
- 装有测量仪表的落镖冲击 35.8 J ASTM D3763
- 模具温度 °C
- UL 阻燃等级 UL 94
- 熔流率(熔体流动速率) 9.6 g/10 min ASTM D1238
- 建议的最大水分含量 0.020 %
- 介电常数 ASTM D150
- 相比耐漏电起痕指数(CTI) PLC 2 UL 746
- 热丝引燃 (HWI) PLC 2 UL 746
- 螺杆转速 rpm