特性: 耐低温冲击,耐化学性良好
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Compressive Stress vs. Strain (ASTM D695),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 悬壁梁缺口冲击强度 ASTM D256
- 收缩率 - 流动 % 内部方法
- 建议的最大水分含量 0.020 %
- 无缺口悬臂梁冲击 3200 J/m ASTM D4812
- 弯曲强度 68.9 MPa ASTM D790
- 干燥温度 110 °C
- 伸长率 170 % ASTM D638
- 螺杆转速 rpm
- 载荷下热变形温度 ASTM D648
- 加工(熔体)温度 °C