添加剂: 阻燃性
特性: Chlorine Free,抗撞击性，良好,良好的流动性,耐热性，中等,无溴,阻燃性
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 装有测量仪表的落镖冲击 ASTM D3763
- 表面电阻率 ohms ASTM D257
- 高电弧燃烧指数(HAI) PLC 0 UL 746
- 料筒后部温度 °C
- 极限氧指数 32 % ASTM D2863
- 弯曲模量 2650 MPa ASTM D790
- 高电弧燃烧指数(HAI) PLC 0 UL 746
- 干燥温度 °C
- RTI Elec 85.0 °C UL 746
- 导热系数 0.20 W/m/K ASTM C177