填料/增强材料: 玻璃纤维增强材料, 10% 填料按重量
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Flexural DMA (ASTM D4065),Pressure-Volume-Temperature (PVT - Zoller Method),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- RTI Elec 50.0 °C UL 746
- 线形热膨胀系数 - 流动 cm/cm/°C ASTM E831
- 背压 MPa
- 排气孔深度 mm
- 维卡软化温度 241 °C ASTM D1525
- 建议的最大水分含量 0.070 %
- 比重 1.16 g/cm³ ASTM D792
- 相比耐漏电起痕指数(CTI) PLC 3 UL 746
- 螺杆转速 rpm
- 高电弧燃烧指数(HAI) PLC 0 UL 746