添加剂: 脱模
特性: 无卤
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Compressive Stress vs. Strain (ASTM D695),Flexural DMA (ASTM D4065),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 落锤冲击 169 J ASTM D3029
- 吸水率 ASTM D570
- 拉伸冲击强度 578 kJ/m² ASTM D1822
- 排气孔深度 mm
- 干燥温度 121 °C
- 雾度 1.0 % ASTM D1003
- UL 阻燃等级 HB UL 94
- 线形热膨胀系数 - 流动 6.8E-5 cm/cm/°C ASTM E831
- 线形热膨胀系数 - 流动 6.8E-5 cm/cm/°C ASTM E831
- 伸长率 ASTM D638