填料/增强材料: 玻璃\矿物, 40% 填料按重量
特性: 收缩性低
用途: 家电部件
外观: 黑色,自然色
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 料筒前部温度 °C
- 吸水率 0.070 % ASTM D570
- 建议的最大水分含量 0.020 %
- 料筒后部温度 °C
- 螺杆转速 rpm
- RTI Imp 140 °C UL 746
- 背压 MPa
- 悬壁梁缺口冲击强度 75 J/m ASTM D256
- 抗张强度 75.8 MPa ASTM D638
- 干燥时间，最大 12 hr