填料/增强材料: 玻璃纤维增强材料, 20% 填料按重量
特性: 尺寸稳定性良好,水解稳定,吸水低或不吸水
机构评级: FDA 未评级,NSF 61
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 吸水率 0.060 % ASTM D570
- 收缩率 - 流动 % 内部方法
- 熔流率(熔体流动速率) 9.0 g/10 min ASTM D1238
- 螺杆转速 rpm
- 高电压电弧起痕速率 (HVTR) PLC 4 UL 746
- 耗散因数 ASTM D150
- 模具温度 °C
- 模具温度 °C
- 载荷下热变形温度
- 加工(熔体)温度 °C