填料/增强材料: 玻璃纤维增强材料, 30% 填料按重量
特性: 低翘曲性
用途: 把手,家电部件,连接器
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 背压 MPa
- 射嘴温度 °C
- 载荷下热变形温度 ASTM D648
- 干燥温度 121 °C
- 装有测量仪表的落镖冲击 ASTM D3763
- 螺杆转速 rpm
- 悬壁梁缺口冲击强度 ASTM D256
- 料筒后部温度 °C
- RTI 125 °C UL 746
- 背压 MPa