特性: 符合 ECO,共聚物,耐化学性良好,耐碱,耐酸
机构评级: EU Eco
外观: 清晰/透明
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 螺杆转速 rpm
- 螺杆转速 rpm
- 弯曲模量 3100 MPa ASTM D790
- 载荷下热变形温度 207 °C ASTM D648
- 弯曲强度 138 MPa ASTM D790
- 高电压电弧起痕速率 (HVTR) PLC 3 UL 746
- 相比耐漏电起痕指数(CTI) PLC 4 UL 746
- RTI Imp 160 °C UL 746
- 射嘴温度 °C
- 介电强度 18 kV/mm ASTM D149