填料/增强材料: 玻璃纤维增强材料, 10% 填料按重量
特性: 符合 ECO
机构评级: EU Eco,NSF 51,WRAS 未评级
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- RTI Elec 170 °C UL 746
- 收缩率 - 流动 % 内部方法
- 吸水率 ASTM D570
- 料筒前部温度 °C
- 无缺口悬臂梁冲击 480 J/m ASTM D4812
- 维卡软化温度 223 °C ASTM D1525
- 比重 1.34 g/cm³ ASTM D792
- 建议注射量 %
- RTI Elec 170 °C UL 746
- 介电强度 28 kV/mm ASTM D149