特性: 高强度,良好的流动性,耐化学性良好,耐热性，高,通用,无定形的,阻燃性
用途: 通用
外观: 清晰/透明
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 拉伸模量 3590 MPa ASTM D638
- 排气孔深度 mm
- 干燥时间，最大 24 hr
- 泰伯耐磨性 10.0 mg ASTM D1044
- 弯曲强度 165 MPa ASTM D790
- 背压 MPa
- 线形热膨胀系数 - 流动 5.6E-5 cm/cm/°C ASTM E831
- RTI Imp 170 °C UL 746
- 弯曲强度 165 MPa ASTM D790
- 载荷下热变形温度 ASTM D648