特性: 无卤
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 抗张强度 ASTM D638
- 耗散因数 ASTM D150
- 排气孔深度 mm
- 干燥时间，最大 48 hr
- 维卡软化温度 154 °C ASTM D1525
- 干燥温度 121 °C
- 高电压电弧起痕速率 (HVTR) PLC 2 UL 746
- 落锤冲击 169 J ASTM D3029
- 高电弧燃烧指数(HAI) PLC 1 UL 746
- 熔流率（熔体流动速率） 7.0 g/10 min ASTM D1238