填料/增强材料: 玻璃纤维增强材料, 15% 填料按重量
特性: 流动性高,水解稳定
用途: 连接器,汽车领域的应用
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 抗张强度 ASTM D638
- 干燥温度 °C
- 无缺口悬臂梁冲击 400 J/m ASTM D4812
- 比重 1.41 g/cm³ ASTM D792
- 弯曲模量 ASTM D790
- 背压 MPa
- 无缺口悬臂梁冲击 400 J/m ASTM D4812
- 无缺口悬臂梁冲击 400 J/m ASTM D4812
- 无缺口悬臂梁冲击 400 J/m ASTM D4812
- 背压 MPa