填料/增强材料: 玻璃纤维增强材料, 15% 填料按重量
特性: 优良外观
用途: 把手,电器用具,外壳
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Specific Heat vs. Temperature (ASTM D3417),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530)
- 干燥温度 121 °C
- 热丝引燃 (HWI) PLC 2 UL 746
- 建议注射量 %
- 特定体积 0.704 cm³/g ASTM D792
- 介电强度 ASTM D149
- RTI Imp 110 °C UL 746
- 比重 1.43 g/cm³ ASTM D792
- 料筒后部温度 °C
- 加工（熔体）温度 °C
- 建议的最大水分含量 0.020 %