Luran® S 777 K|ASA|Styrolution物性表报告及物性特性介绍,Luran® S 777 K|ASA|Styrolution注塑参数详情-塑料物性表查询网

Product TextsEasy flowing injection moulding grade with good toughness and heat distortion resistance.

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	15	cm³/10min	ISO 1133
温度(Temperature)	220	°C	ISO 1133
负载(Load)	10	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.5	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.9	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2300	MPa	ISO 527-1/-2
屈服应力(Yield stress)	48	MPa	ISO 527-1/-2
屈服应变(Yield strain)	3.3	%	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	9	%	ISO 527-1/-2
Tensile creep modulus (1h)	1850	MPa	ISO 899-1
Tensile creep modulus (1000h)	1400	MPa	ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)	250	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	90	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	17	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	4	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	97	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	101	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	97	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	95	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6	mm	IEC 60695-11-10
UL 识别(recognition)	UL	-	-
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8	mm	IEC 60695-11-10
UL 识别(recognition)	UL	-	-
Oxygen index	19	%	ISO 4589-1/-2

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3.7	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3.4	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	110	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	240	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	1E13	Ohm	IEC 60093
电气强度(Electric strength)	35	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	600	-	IEC 60112

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.65	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.35	%	Sim. to ISO 62
密度(Density)	1070	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体热导率(Thermal conductivity of melt)	0.16	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	1860	J/(kg K)	-
喷射温度(Ejection temperature)	95	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	250	°C	ISO 294
Injection Molding, mold temperature	60	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294

DiagramsV. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING .