SAXATEC™ 4210|ASA|SAX Polymers物性表报告及物性特性介绍,SAXATEC™ 4210|ASA|SAX Polymers注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	10	cm³/10min	ISO 1133
温度(Temperature)	220	°C	ISO 1133
负载(Load)	10	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.6	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	2800	MPa	ISO 527-1/-2
抗拉强度(Tensile Strength)	58	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	20	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	100	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	60	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	7	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	5	kJ/m²	ISO 179/1eA
悬臂梁式冲击切口 (23°C)	8	kJ/m²	ISO 180/1A
悬臂梁式冲击切口	5	kJ/m²	ISO 180/1A
温度(Temperature)	-30	°C	ISO 180/1A
悬臂梁式冲击无切口(Izod Impact unnotched) (23°C)	80	kJ/m²	ISO 180/1U

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	96	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	110	°C	ISO 306

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
密度(Density)	1070	kg/m³	ISO 1183
水分含量(Moisture Content)	0.2	%	-

CharacteristicsProcessingInjection MoldingDelivery formPellets, Natural ColorSpecial CharacteristicsHigh impact or impact modified, U.V. stabilized or stable to weather, Heat stabilized or stable to heatFeaturesLow OdorRegional AvailabilityEuropeDisclaimerCopyright M-Base .