Grilamid LV-65H SST nat|PA12-GF65|EMS-GRIVORY物性表报告及物性特性介绍,Grilamid LV-65H SST nat|PA12-GF65|EMS-GRIVORY注塑参数详情-塑料物性表查询网

Product TextsProduct designation according to ISO 1874: and electronics, lighting,1 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.5 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	19000 / 18000	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	190 / 180	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	3 / 3.5	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	- / 75	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	- / 75	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	- / 13	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	- / 13	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	178 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	165 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (8.00 MPa)	150 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	15 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	110 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8 / *	mm	IEC 60695-11-10

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
体积电阻率(Volume resistivity)	- / 1E11	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E12	Ohm	IEC 60093
电气强度(Electric strength)	- / 35	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	- / 600	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.7 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.3 / *	%	Sim. to ISO 62
密度(Density)	1700 / -	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1410	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.29	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	1900	J/(kg K)	-
Eff. thermal diffusivity	1.08E-7	m²/s	-
喷射温度(Ejection temperature)	155	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	280	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	300	mm/s	ISO 294
Injection Molding, pressure at hold	75	MPa	ISO 294

CharacteristicsProcessingInjection MoldingDelivery formPelletsSpecial CharacteristicsU.V. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base .
[/td][/tr][/table]