LAURAMID® A|PA12-I|Evonik Industries物性表报告及物性特性介绍,LAURAMID® A|PA12-I|Evonik Industries注塑参数详情-塑料物性表查询网

LAURAMID® A|PA12-I|Evonik Industries

LAURAMID® A|PA12-I|Evonik Industries 物性表: LAURAMID® A|PA12-I|Evonik Industries物性表及特性介绍,LAURAMID® A|PA12-I|Evonik Industries注塑参数详情,如需LAURAMID® A|PA12-I|Evonik Industries下载, 可到相关下载区下载

Product TextsLAURAMID® A LAURAMID - Type "A" is impactThe test bars were prepared by machining from cast plaques.KG.Handmann is checked by X-ray diagnosis. of deflection under load (1.80 MPa)	127	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	186	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	176	°C	ISO 306
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	6.0	mm	IEC 60695-11-10

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3.5	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	380	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	1E14	Ohm	IEC 60093

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.4	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.9	%	Sim. to ISO 62
密度(Density)	1030	kg/m³	ISO 1183

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, pressure at hold	70	MPa	ISO 294

Diagrams .
[/td][/tr][/table]

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-100883.html

免责声明: 本文 LAURAMID® A|PA12-I|Evonik Industries 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络