VESTAMID® L-GF30 nc (nf)|PA12-GF30|Evonik Industries

VESTAMID® L-GF30 nc (nf)|PA12-GF30|Evonik Industries 物性表: VESTAMID® L-GF30 nc (nf)|PA12-GF30|Evonik Industries物性表及特性介绍,VESTAMID® L-GF30 nc (nf)|PA12-GF30|Evonik Industries注塑参数详情,如需VESTAMID® L-GF30 nc (nf)|PA12-GF30|Evonik Industries下载, 可到相关下载区下载

Product TextsVESTAMID® L-GF30 nc1 / *
%ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)0.7 / *%ISO 294-4, 2577
机械性能(机械性能(Mechanical properties))dry / cond单位(Unit)测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)6500 / 5500MPaISO 527-1/-2
屈服应力(Yield stress)* / 110MPaISO 527-1/-2
屈服应变(Yield strain)* / 5%ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)* / 5.5%ISO 527-1/-2
破坏时应变(Stress at break)120 / *MPaISO 527-1/-2
破坏时应变(Strain at break)5 / *%ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)85 / 75kJ/m²ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)100 / 95kJ/m²ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)23 / 24kJ/m²ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)21 / 22kJ/m²ISO 179/1eA
热性能(热性能(Thermal properties))dry / cond单位(Unit)测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)178 / *°CISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)165 / *°CISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)175 / *°CISO 75-1/-2
维卡软化温度(50℃/ h的50N)Vicat softening temperature175 / *°CISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)60 / *E-6/KISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)70 / *E-6/KISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.HB / *classIEC 60695-11-10
厚度测试(Thickness tested)1.6 / *mmIEC 60695-11-10
UL 识别(recognition)UL / *--
燃烧性(球压痕硬度(Burning behav)). at thickness hHB / *classIEC 60695-11-10
厚度测试(Thickness tested)3.2 / *mmIEC 60695-11-10
UL 识别(recognition)UL / *--
电气性能(Electrical properties)dry / cond单位(Unit)测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)4.1 / 5-IEC 60250
相对介电常数(Relative permittivity) (1MHz)3.4 / 4-IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)310 / 600E-4IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)330 / 400E-4IEC 60250
体积电阻率(Volume resistivity)>1E13 / 2E12Ohm*mIEC 60093
表面电阻率(Surface resistivity)* / >1E15OhmIEC 60093
电气强度(Electric strength)44 / 45kV/mmIEC 60243-1
相比漏电起痕指数(Comparative tracking index)600 / 600-IEC 60112
其他属性(Other properties)dry / cond单位(Unit)测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)1.1 / *%Sim. to ISO 62
吸湿性(Humidity absorption)0.5 / *%Sim. to ISO 62
密度(Density)1240 / 1240kg/m³ISO 1183
流变计算属性(Rheological calculation properties)值(Value)单位(Unit)测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt1090kg/m³-
熔体热导率(Thermal conductivity of melt)0.28W/(m K)-
规格的热容融化(Spec. heat capacity of melt)2400J/(kg K)-
喷射温度(Ejection temperature)180°C-
Test specimen production值(Value)单位(Unit)测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature260°CISO 294
Injection Molding, mold temperature80°CISO 10724
Injection Molding, injection velocity200mm/sISO 294
Injection Molding, pressure at hold70MPaISO 294
Diagrams1 % The drying time is dependent on the drying temperature. At a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during drying. ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] 4 Brake fluid (120°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-101046.html

免责声明: 本文 VESTAMID® L-GF30 nc (nf)|PA12-GF30|Evonik Industries 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4