Pearlthane® 11H94|TPU|Merquinsa物性表报告及物性特性介绍,Pearlthane® 11H94|TPU|Merquinsa注塑参数详情-塑料物性表查询网

Pearlthane® 11H94|TPU|Merquinsa

Pearlthane® 11H94|TPU|Merquinsa 物性表: Pearlthane® 11H94|TPU|Merquinsa物性表及特性介绍,Pearlthane® 11H94|TPU|Merquinsa注塑参数详情,如需Pearlthane® 11H94|TPU|Merquinsa下载, 可到相关下载区下载

Product TextsPEARLTHANE® 11H94 is especially recommended for injection molding applications such as: automotive parts, seals and gaskets and a variety of high performance technical parts.

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
抗拉强度(Tensile Strength)	42	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	>50	%	ISO 527-1/-2
Stress at 100% elongation	12	MPa	ISO 527-1/-2
Stress at 300% elongation	69	MPa	ISO 527-1/-2
抗拉强度(撕裂强度(Tear strength))	135	kN/m	ISO 34-1
Abrasion resistance	35	mm³	ISO 4649
邵尔A硬度(Shore A hardness) (3s)	95	-	ISO 868
ASTM数据(ASTM Data)
Compression Set(22 hr @ 158 °F)	32	%	ASTM D 395

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔化温度(熔化温度(Melting temperature)) (10°C/min)	202	°C	ISO 11357-1/-3
玻璃化转变温度(Glass transition temperature) (10°C/min)	-39	°C	ISO 11357-1/-2

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
密度(Density)	1180	kg/m³	ISO 1183
水分含量(Moisture Content)	0.1	%	-

CharacteristicsProcessingInjection MoldingDelivery formPelletsFeaturesCopolymerApplicationsAutomotiveRegional AvailabilityNorth America, EuropeDisclaimerCopyright M-Base .

关键词:
TPU
Merquinsa
Pearlthane® 11H94

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-101624.html

免责声明: 本文 Pearlthane® 11H94|TPU|Merquinsa 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络