Noryl GFN1410V|(PPE+PS)-GX10|SABIC_IP物性表报告及物性特性介绍,Noryl GFN1410V|(PPE+PS)-GX10|SABIC

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	20	cm³/10min	ISO 1133
温度(Temperature)	280	°C	ISO 1133
负载(Load)	10	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	4200	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	80	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	3.4	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	28	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	28	kJ/m²	ISO 179/1eU
弯曲弹性模量(Flexural modulus) (23°C)	4000	MPa	ISO 178
悬臂梁式冲击无切口(Izod Impact unnotched) (23°C)	26	kJ/m²	ISO 180/1U
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	4400	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	84	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	3	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	4200	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.084	kJ/m	ASTM D 256
悬臂梁式冲击无切口(Izod Impact unnotched) (1/8 in)	0.42	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	130	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	135	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	30	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	70	E-6/K	ISO 11359-1/-2
ASTM数据(ASTM Data)
热膨胀系数(Coefficient of Thermal Expansion) (MD)	30	E-6/K	ASTM D 696
热膨胀系数(Coefficient of Thermal Expansion) (TD)	70	E-6/K	ASTM D 696
DTUL @ 264 psi	132	°C	ASTM D 648
Vicat 温度(Temperature)	135	°C	ASTM D 1525

CharacteristicsProcessingInjection MoldingChemical ResistanceHydrolytically StableRegional AvailabilityEurope,.