Polyethylene 107-01K|(PE-LD)|UfaorgSyntez物性表报告及物性特性介绍,Polyethylene 107-01K|(PE-LD)|UfaorgSyntez注塑参数详情-塑料物性表查询网

Product TextsThe data for this material was provided by Plastinfo.ru.16

ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	280	MPa	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	>50	%	ISO 527-1/-2
破坏时应变(Stress at break)	12.2	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	>50	%	ISO 527-1/-2
弯曲弹性模量(Flexural modulus) (23°C)	98	MPa	ISO 178

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔化温度(熔化温度(Melting temperature)) (10°C/min)	110	°C	ISO 11357-1/-3
Vicat softening temperature A	100	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	550	E-6/K	ISO 11359-1/-2

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
相对介电常数(Relative permittivity) (1MHz)	2.3	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	0.0003	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	1E15	Ohm	IEC 60093
电气强度(Electric strength)	40	kV/mm	IEC 60243-1

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
吸水率(Water absorption)	0.02	%	Sim. to ISO 62
密度(Density)	919	kg/m³	ISO 1183

材料特殊性能(Material specific properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
粘数(Viscosity number)	1.5	cm³/g	ISO 307, 1157, 1628

CharacteristicsProcessingInjection Molding, Other Extrusion, Compression Molding, Wire/Cable ExtrusionSpecial CharacteristicsHeat stabilized or stable to heatFeaturesHomopolymerChemical ResistanceAcid Resistance, Alkali Resistance, General Chemical Resistance, Environmental Stress Crack Resistance, Solvent Resistance, Oxidation ResistanceApplicationsElectrical and ElectronicalRegional AvailabilityEuropeDisclaimerCopyright M-Base .
[/td][/tr][/table]