Thermocomp LF006E|PEEK-GF|SABIC_IP物性表报告及物性特性介绍,Thermocomp LF006E|PEEK-GF|SABIC

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	12900	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	187	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	2	%	ISO 527-1/-2
弯曲弹性模量(Flexural modulus) (23°C)	12500	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	11	kJ/m²	ISO 180/1A
悬臂梁式冲击无切口(Izod Impact unnotched) (23°C)	58	kJ/m²	ISO 180/1U
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	13030	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	181	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	2	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	11030	MPa	ASTM D 790
抗弯强度(Flexural Strength)	262	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.117	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	240	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	240	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	20.5	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	36.2	E-6/K	ISO 11359-1/-2
ASTM数据(ASTM Data)
热膨胀系数(Coefficient of Thermal Expansion) (MD)	19.8	E-6/K	ASTM D 696
热膨胀系数(Coefficient of Thermal Expansion) (TD)	36	E-6/K	ASTM D 696
DTUL @ 66 psi	298	°C	ASTM D 648
DTUL @ 264 psi	298	°C	ASTM D 648

CharacteristicsProcessingInjection MoldingRegional AvailabilityNorth America, Europe, South and Central America,.