Hytrel® 4056|TPC|DuPont物性表报告及物性特性介绍,Hytrel® 4056|TPC|DuPont注塑参数详情-塑料物性表查询网

Product TextsISO 18064 : TPC-ET In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilised, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations.It contains a non-discoloring stabilizer. It is recommended for extrusion and compounding.3	g/10min	ASTM D 1238
温度(Temperature)	190	°C	-
负载(Load)	2.16	kg	-
模具收缩(Mold Shrinkage) (MD)	0.005	mm/mm	ASTM D 955
密度(Density) (73°F)	1170	kg/m³	ASTM D 792
吸水率(Water Absorption) (24hr)	0.6	%	ASTM D 570

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	5	cm³/10min	ISO 1133
温度(Temperature)	190	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.5	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.5	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	55	MPa	ISO 527-1/-2
Stress at 50% strain	7.5	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	>50	%	ISO 527-1/-2
Tensile creep modulus (1h)	50	MPa	ISO 899-1
Tensile creep modulus (1000h)	40	MPa	ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)	N	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	N	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	N	kJ/m²	ISO 179/1eA
Tensile notched impact strength (+23°C)	230	kJ/m²	ISO 8256/1
Stress at 10% elongation	4.2	MPa	ISO 527-1/-2
Stress at 100% elongation	27	MPa	ISO 527-1/-2
破坏时应变(Strain at break) TPE	>300	%	ISO 527-1/-2
破坏时应变(Stress at break) TPE	30	MPa	ISO 527-1/-2
抗拉强度(撕裂强度(Tear strength))	101	kN/m	ISO 34-1
Abrasion resistance	200	mm³	ISO 4649
Shore D hardness (15s)	39	-	ISO 868
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength) at Break	21	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	700	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	62	MPa	ASTM D 790
Shore D Hardness	40	-	ASTM D 2240
悬臂梁式冲击切口 (1/8 in)	N	kJ/m	ASTM D 256
悬臂梁式冲击切口 (Low-温度(Temperature))	N	kJ/m	ASTM D 256
温度(Temperature)	-40	°C	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	150	°C	ISO 11357-1/-3
玻璃化转变温度(Glass transition temperature) (10°C/min)	-40	°C	ISO 11357-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	50	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	220	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	220	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 识别(recognition)	UL	-	-
Oxygen index	20	%	ISO 4589-1/-2
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	HB	-	UL 94
厚度测试(Thickness tested)	1.5	mm	-
热膨胀系数(Coefficient of Thermal Expansion) (MD)	130	E-6/K	ASTM D 696
热膨胀系数(Coefficient of Thermal Expansion) (TD)	160	E-6/K	ASTM D 696
DTUL @ 66 psi	54	°C	ASTM D 648
熔化温度(Melting 温度(Temperature))	150	°C	ASTM D 3418

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	5.2	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	4.7	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	110	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	525	E-4	IEC 60250
体积电阻率(Volume resistivity)	7E10	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	2E14	Ohm	IEC 60093
电气强度(Electric strength)	18	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	600	-	IEC 60112
ASTM数据(ASTM Data)
绝缘强度(Dielectric Strength) (Short Time)	16.1	kV/mm	ASTM D 149
耗散因数(Dissipation Factor) (1 MHz)	0.06	-	ASTM D 150
介电常数(Dielectric Constant) (1 MHz)	4.6	-	ASTM D 150

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.7	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1150	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1020	kg/m³	-
Eff. thermal diffusivity	5.44E-8	m²/s	-

DiagramsEng.Oil, ISP (140°C)[/td][/tr][tr][td] ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (>90°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] 4 Brake fluid (130°C)[/td][/tr][tr][td] .
[/td][/tr][/table]