ALCOM® PC+AWL 750/25 WT1110-04LB|(PC+ABS)...|ALBIS Plastic物性表报告及物性特性介绍,ALCOM® PC+AWL 750/25 WT1110-04LB|(PC+ABS)...|ALBIS Plastic注塑参数详情-塑料物性表查询网

ALCOM® PC+AWL 750/25 WT1110-04LB|(PC+ABS)...|ALBIS Plastic

.. |ALBIS Plastic

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	25	cm³/10min	ISO 1133
温度(Temperature)	260	°C	ISO 1133
负载(Load)	5	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2900	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	50	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	3.5	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	30	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	3.5	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	103	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	115	°C	ISO 306

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density)	1370	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

关键词:
ALCOM® PC+AWL 750/25 WT1110-04LB|(PC+ABS)...|ALBIS Plastic