COEFF线性热(Coeff. of linear therm. expansion) (parallel)
80
E-6/K
ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)
80
E-6/K
ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn.
HB
class
IEC 60695-11-10
厚度测试(Thickness tested)
1.5
mm
IEC 60695-11-10
燃烧性厚度(Burning behav. at thickness h)
HB
class
IEC 60695-11-10
厚度测试(Thickness tested)
3.0
mm
IEC 60695-11-10
电气性能(Electrical properties)
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据
相对介电常数(Relative permittivity) (1MHz)
2.7
-
IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)
70
E-4
IEC 60250
体积电阻率(Volume resistivity)
>1E13
Ohm*m
IEC 60093
表面电阻率(Surface resistivity)
>1E15
Ohm
IEC 60093
电气强度(Electric strength)
35
kV/mm
IEC 60243-1
相比漏电起痕指数(Comparative tracking index)
250
-
IEC 60112
其他属性(Other properties)
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据
吸水率(Water absorption)
0.7
%
Sim. to ISO 62
吸湿性(Humidity absorption)
0.2
%
Sim. to ISO 62
密度(Density)
1120
kg/m³
ISO 1183
流变计算属性(Rheological calculation properties)
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据
熔体热导率(Thermal conductivity of melt)
0.2
W/(m K)
-
CharacteristicsProcessingInjection MoldingSpecial CharacteristicsHeat stabilized or stable to heatFeaturesDuctileApplicationsAutomotive, Electrical and ElectronicalRegional AvailabilityEurope, Near East/AfricaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
