CRESS-ATAL™ CJ20|POM|CP Polymers物性表报告及物性特性介绍,CRESS-ATAL™ CJ20|POM|CP Polymers注塑参数详情-塑料物性表查询网

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
密度(Density) (73°F)	1410	kg/m³	ASTM D 792

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength) at Yield	60.8	MPa	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	2549.13	MPa	ASTM D 790
抗弯强度(Flexural Strength)	90.2	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	M 80	-	ASTM D 785
悬臂梁式冲击切口 (1/8 in)	0.0586	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	HB	-	UL 94
DTUL @ 264 psi	160	°C	ASTM D 648

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
表面电阻率(Surface Resistivity)	1E12	Ohm	ASTM D 257
体积电阻率(Volume Resistivity)	1E12	Ohm*cm	ASTM D 257

CharacteristicsSpecial CharacteristicsAnti-staticFeaturesCopolymerRegional AvailabilityNorth AmericaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.