Bayblend® W85 HI|(PC+ABS)|Bayer MatSc物性表报告及物性特性介绍,Bayblend® W85 HI|(PC+ABS)|Bayer MatSc注塑参数详情-塑料物性表查询网

Product Texts(PC+ASA) blendunreinforcedinjection molding grade with improved weather resistanceoptimized heat ageing stabilityexcellent low temperature ductilityhigh heat resistanceVicat/B 120 = 134 °C.

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	17	cm³/10min	ISO 1133
温度(Temperature)	260	°C	ISO 1133
负载(Load)	5	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2300	MPa	ISO 527-1/-2
屈服应力(Yield stress)	56	MPa	ISO 527-1/-2
屈服应变(Yield strain)	5	%	ISO 527-1/-2
Puncture energy (+23°C)	45	J	ISO 6603-2
Puncture energy (-30°C)	45	J	ISO 6603-2

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	985	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.173	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	2010	J/(kg K)	-
Eff. thermal diffusivity	8.73E-8	m²/s	-
喷射温度(Ejection temperature)	130	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	240	mm/s	ISO 294

Diagrams Water content: 0.02 % M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.