Product TextsISO 1043: POM-SD Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating and available in a variety of colours and speciality grades. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-17 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. 5% Teflon PTFE Micropowder. It has been developed for consideration into applications such as parts for the food industry.16
kg
ISO 1133
成型收缩(Molding shrinkage) (parallel)
1.7
%
ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)
1.7
%
ISO 294-4, 2577
机械性能(机械性能(Mechanical properties))
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)
2300
MPa
ISO 527-1/-2
屈服应力(Yield stress)
71
MPa
ISO 527-1/-2
屈服应变(Yield strain)
14
%
ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)
20
%
ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)
170
kJ/m²
ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)
160
kJ/m²
ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)
5
kJ/m²
ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)
4
kJ/m²
ISO 179/1eA
热性能(热性能(Thermal properties))
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)
178
°C
ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)
104
°C
ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)
165
°C
ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)
100
E-6/K
ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)
100
E-6/K
ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.
HB
class
IEC 60695-11-10
厚度测试(Thickness tested)
1.5
mm
IEC 60695-11-10
Oxygen index
18
%
ISO 4589-1/-2
电气性能(Electrical properties)
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
耗散因数(耗散因数(Dissipation factor)) (100Hz)
100
E-4
IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)
145
E-4
IEC 60250
体积电阻率(Volume resistivity)
1E12
Ohm*m
IEC 60093
表面电阻率(Surface resistivity)
1E12
Ohm
IEC 60093
电气强度(Electric strength)
32
kV/mm
IEC 60243-1
相比漏电起痕指数(Comparative tracking index)
600
-
IEC 60112
其他属性(Other properties)
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)
0.9
%
Sim. to ISO 62
吸湿性(Humidity absorption)
0.17
%
Sim. to ISO 62
密度(Density)
1430
kg/m³
ISO 1183
CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesRelease agentRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
[/td][/tr][/table]