Cycoloy XCM830|(PC+ABS)|SABIC_IP物性表报告及物性特性介绍,Cycoloy XCM830|(PC+ABS)|SABIC

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
熔体流动指数(Melt Flow Index)	11	g/10min	ASTM D 1238
温度(Temperature)	260	°C	-
负载(Load)	5	kg	-
模具收缩(Mold Shrinkage) (MD)	0.0075	mm/mm	ASTM D 955
密度(Density) (73°F)	1220	kg/m³	ASTM D 792

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	9	cm³/10min	ISO 1133
温度(Temperature)	260	°C	ISO 1133
负载(Load)	5	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	3100	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	55	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	>50	%	ISO 527-1/-2
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	45	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	10	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	3100	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	45	kJ/m²	ISO 180/1A
悬臂梁式冲击切口	10	kJ/m²	ISO 180/1A
温度(Temperature)	-30	°C	ISO 180/1A
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	3400	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Yield	60	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	55	MPa	ASTM D 638
屈服伸长率(Elongation at Yield)	5	%	ASTM D 638
断裂伸长率(Elongation at Break)	100	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	3100	MPa	ASTM D 790
抗弯强度(Flexural Strength)	95	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.48	kJ/m	ASTM D 256
悬臂梁式冲击切口 (Low-温度(Temperature))	0.115	kJ/m	ASTM D 256
温度(Temperature)	-30	°C	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	118	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	138	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	60	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	70	E-6/K	ISO 11359-1/-2
ASTM数据(ASTM Data)
热膨胀系数(Coefficient of Thermal Expansion) (MD)	60	E-6/K	ASTM D 696
热膨胀系数(Coefficient of Thermal Expansion) (TD)	70	E-6/K	ASTM D 696
DTUL @ 264 psi	118	°C	ASTM D 648
Vicat 温度(Temperature)	138	°C	ASTM D 1525

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
吸水率(Water absorption)	0.4	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.1	%	Sim. to ISO 62
密度(Density)	1220	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体热导率(Thermal conductivity of melt)	0.2	W/(m K)	-

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsHigh impact or impact modifiedRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.