HOSTAFORM MT8R02|POM|Ticona

HOSTAFORM MT8R02|POM|Ticona 物性表: HOSTAFORM MT8R02|POM|Ticona物性表及特性介绍,HOSTAFORM MT8R02|POM|Ticona注塑参数详情,如需HOSTAFORM MT8R02|POM|Ticona下载, 可到相关下载区下载

Product TextsHostaform® acetal copolymer grade MT8R02 is a special grade developed
流变性能(Rheological properties)值(Value)单位(Unit)测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)8.5cm³/10minISO 1133
温度(Temperature)190°CISO 1133
负载(Load)2.16kgISO 1133
机械性能(机械性能(Mechanical properties))值(Value)单位(Unit)测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)2700MPaISO 527-1/-2
屈服应力(Yield stress)62MPaISO 527-1/-2
屈服应变(Yield strain)9%ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)30%ISO 527-1/-2
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)8kJ/m²ISO 179/1eA
热性能(热性能(Thermal properties))值(Value)单位(Unit)测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)166°CISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)82°CISO 75-1/-2
其他属性(Other properties)值(Value)单位(Unit)测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density)1400kg/m³ISO 1183
Test specimen production值(Value)单位(Unit)测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Processing conditions acc. ISO9990-ISO ....-2
Injection Molding, melt temperature205°CISO 294
Injection Molding, mold temperature90°CISO 10724
Injection Molding, injection velocity200mm/sISO 294
Injection Molding, pressure at hold90MPaISO 294
CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesLubricants, Release agentRegional AvailabilityNorth America, Europe, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING 40 mm Water content  0,2%g. moisturizing is not necessary.
Application examples
Injection system
DisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-76795.html

免责声明: 本文 HOSTAFORM MT8R02|POM|Ticona 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4