Faradex NSL121|(PC+ABS+PTFE)-MF(Fe)|SABIC_IP物性表报告及物性特性介绍,Faradex NSL121|(PC+ABS+PTFE)-MF(Fe)|SABIC

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
成型收缩(Molding shrinkage) (parallel)	0.6	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	2900	MPa	ISO 527-1/-2
弯曲弹性模量(Flexural modulus) (23°C)	2900	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	5	kJ/m²	ISO 180/1A
悬臂梁式冲击无切口(Izod Impact unnotched) (23°C)	35	kJ/m²	ISO 180/1U

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	92	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	57	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	70	E-6/K	ISO 11359-1/-2
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	V-2	-	UL 94
厚度测试(Thickness tested)	1.6	mm	-

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
表面电阻率(Surface Resistivity)	10000	Ohm	ASTM D 257

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
密度(Density)	1310	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingAdditivesLubricants, Flame retarding agentSpecial CharacteristicsIncreased electrical conductivity, Flame retardantFeaturesEMI Attenuation/ShieldingRegional AvailabilityEurope, Near East/AfricaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.