HOSTAFORM S 27063|POM|Ticona 物性表: HOSTAFORM S 27063|POM|Ticona物性表及特性介绍,HOSTAFORM S 27063|POM|Ticona注塑参数详情,如需HOSTAFORM S 27063|POM|Ticona下载, 可到相关下载区下载
Product TextsChemical abbreviation according to ISO 1043-1: POM-HI,57 mm as UL16
kg
ISO 1133
成型收缩(Molding shrinkage) (parallel)
1.9
%
ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)
1.8
%
ISO 294-4, 2577
机械性能(机械性能(Mechanical properties))
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)
2200
MPa
ISO 527-1/-2
屈服应力(Yield stress)
54
MPa
ISO 527-1/-2
屈服应变(Yield strain)
9
%
ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)
30
%
ISO 527-1/-2
Tensile creep modulus (1h)
1850
MPa
ISO 899-1
Tensile creep modulus (1000h)
1050
MPa
ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)
140
kJ/m²
ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)
90
kJ/m²
ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)
9
kJ/m²
ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)
6
kJ/m²
ISO 179/1eA
热性能(热性能(Thermal properties))
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)
166
°C
ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)
84
°C
ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature
140
°C
ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)
120
E-6/K
ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.
HB
class
IEC 60695-11-10
厚度测试(Thickness tested)
1.6
mm
IEC 60695-11-10
UL 识别(recognition)
UL
-
-
燃烧性(球压痕硬度(Burning behav)). at thickness h
HB
class
IEC 60695-11-10
厚度测试(Thickness tested)
3.2
mm
IEC 60695-11-10
UL 识别(recognition)
UL
-
-
电气性能(Electrical properties)
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)
4.2
-
IEC 60250
相对介电常数(Relative permittivity) (1MHz)
4.2
-
IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)
50
E-4
IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)
150
E-4
IEC 60250
体积电阻率(Volume resistivity)
1E11
Ohm*m
IEC 60093
表面电阻率(Surface resistivity)
1E13
Ohm
IEC 60093
电气强度(Electric strength)
28
kV/mm
IEC 60243-1
相比漏电起痕指数(Comparative tracking index)
600
-
IEC 60112
其他属性(Other properties)
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)
0.65
%
Sim. to ISO 62
吸湿性(Humidity absorption)
0.2
%
Sim. to ISO 62
密度(Density)
1390
kg/m³
ISO 1183
Test specimen production
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Processing conditions acc. ISO
9990
-
ISO ....-2
Injection Molding, melt temperature
205
°C
ISO 294
Injection Molding, mold temperature
80
°C
ISO 10724
Injection Molding, injection velocity
200
mm/s
ISO 294
Injection Molding, pressure at hold
90
MPa
ISO 294
Diagrams 40 mm Water content 0,2%g. moisturizing is not necessary.DisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
[/td][/tr][/table]
