Iupital F40|POM|Mitsubishi EP

Iupital F40|POM|Mitsubishi EP 物性表: Iupital F40|POM|Mitsubishi EP物性表及特性介绍,Iupital F40|POM|Mitsubishi EP注塑参数详情,如需Iupital F40|POM|Mitsubishi EP下载, 可到相关下载区下载

流变性能(Rheological properties)值(Value)单位(Unit)测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)45cm³/10minISO 1133
温度(Temperature)190°CISO 1133
负载(Load)2.16kgISO 1133
成型收缩(Molding shrinkage) (parallel)2.0%ISO 294-4, 2577
熔体流动指数(熔体流动指数(Melt flow index)) (MFI)52g/10minISO 1133
MFI温度(MFI temperature)190°CISO 1133
MFI负载(MFI load)2.16kgISO 1133
机械性能(机械性能(Mechanical properties))值(Value)单位(Unit)测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)2900MPaISO 527-1/-2
屈服应力(Yield stress)64MPaISO 527-1/-2
屈服应变(Yield strain)7%ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)20%ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)100kJ/m²ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)5kJ/m²ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)2700MPaISO 178
热性能(热性能(Thermal properties))值(Value)单位(Unit)测试标准(Test Standard)
ISO数据
熔化温度(熔化温度(Melting temperature)) (10°C/min)166°CISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)105°CISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)156°CISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)110E-6/KISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)110E-6/KISO 11359-1/-2
燃烧性厚度(Burning behav. at thickness h)HBclassIEC 60695-11-10
厚度测试(Thickness tested)0.8mmIEC 60695-11-10
UL 识别(recognition)UL--
电气性能(Electrical properties)值(Value)单位(Unit)测试标准(Test Standard)
ISO数据
相对介电常数(Relative permittivity) (100Hz)3.9-IEC 60250
相对介电常数(Relative permittivity) (1MHz)3.9-IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)20E-4IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)70E-4IEC 60250
体积电阻率(Volume resistivity)1E12Ohm*mIEC 60093
表面电阻率(Surface resistivity)1E16OhmIEC 60093
电气强度(Electric strength)32kV/mmIEC 60243-1
相比漏电起痕指数(Comparative tracking index)600-IEC 60112
其他属性(Other properties)值(Value)单位(Unit)测试标准(Test Standard)
ISO数据
吸湿性(Humidity absorption)0.22%Sim. to ISO 62
密度(Density)1410kg/m³ISO 1183
CharacteristicsRegional AvailabilityNorth America, Europe, Asia PacificDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-76928.html

免责声明: 本文 Iupital F40|POM|Mitsubishi EP 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4