KEPITAL® FU2050|POM|KEP物性表报告及物性特性介绍,KEPITAL® FU2050|POM|KEP注塑参数详情-塑料物性表查询网

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
熔体流动指数(Melt Flow Index)	3	g/10min	ASTM D 1238
温度(Temperature)	190	°C	-
负载(Load)	2.16	kg	-
模具收缩(Mold Shrinkage) (MD)	0.011	mm/mm	ASTM D 955
密度(Density) (73°F)	1280	kg/m³	ASTM D 792

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
成型收缩(Molding shrinkage) (parallel)	1.1	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
抗拉强度(Tensile Strength)	24	MPa	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	50	%	ISO 527-1/-2
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	65	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	750	MPa	ISO 178
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength)	21.6	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	300	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	685.962	MPa	ASTM D 790
抗弯强度(Flexural Strength)	24	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	N	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	58	°C	ISO 75-1/-2
Burning behav. at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	HB	-	UL 94
厚度测试(Thickness tested)	0.762	mm	-
热膨胀系数(Coefficient of Thermal Expansion) (TD)	130	E-6/K	ASTM D 696
DTUL @ 264 psi	70	°C	ASTM D 648
熔化温度(Melting 温度(Temperature))	165	°C	ASTM D 3418

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
体积电阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	1E16	Ohm	IEC 60093
ASTM数据(ASTM Data)
表面电阻率(Surface Resistivity)	1E16	Ohm	ASTM D 257
体积电阻率(Volume Resistivity)	1E14	Ohm*cm	ASTM D 257

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
密度(Density)	1280	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsHigh impact or impact modifiedFeaturesCopolymerApplicationsGeneral PurposeRegional AvailabilityNorth America, Europe, Asia PacificDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.