ISOFORM® AK 09 NA|POM|Sirmax物性表报告及物性特性介绍,ISOFORM® AK 09 NA|POM|Sirmax注塑参数详情-塑料物性表查询网

ISOFORM® AK 09 NA|POM|Sirmax

ISOFORM® AK 09 NA|POM|Sirmax 物性表: ISOFORM® AK 09 NA|POM|Sirmax物性表及特性介绍,ISOFORM® AK 09 NA|POM|Sirmax注塑参数详情,如需ISOFORM® AK 09 NA|POM|Sirmax下载, 可到相关下载区下载

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体流动指数(熔体流动指数(Melt flow index)) (MFI)	9	g/10min	ISO 1133
MFI温度(MFI temperature)	190	°C	ISO 1133
MFI负载(MFI load)	2.16	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
弯曲弹性模量(Flexural modulus) (23°C)	2650	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	7	kJ/m²	ISO 180/1A

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
维卡软化温度（50℃/ h的50N）Vicat softening temperature	150	°C	ISO 306

CharacteristicsFeaturesCopolymerApplicationsGeneral PurposeRegional AvailabilityEuropeDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

关键词:
ISOFORM® AK 09 NA|POM|Sirmax