COEFF线性热(Coeff. of linear therm. expansion) (normal)
80
E-6/K
ISO 11359-1/-2
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)
HB
-
UL 94
厚度测试(Thickness tested)
1.6
mm
-
DTUL @ 264 psi
112
°C
ASTM D 648
Vicat 温度(Temperature)
125
°C
ASTM D 1525
电气性能(Electrical properties)
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据
相对介电常数(Relative permittivity) (1MHz)
2.9
-
IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)
500
E-4
IEC 60250
体积电阻率(Volume resistivity)
1E13
Ohm*m
IEC 60093
表面电阻率(Surface resistivity)
1E15
Ohm
IEC 60093
电气强度(Electric strength)
25
kV/mm
IEC 60243-1
其他属性(Other properties)
值(Value)
单位(Unit)
测试标准(Test Standard)
ISO数据
吸湿性(Humidity absorption)
0.2
%
Sim. to ISO 62
CharacteristicsProcessingInjection MoldingDelivery formNatural ColorSpecial CharacteristicsHeat stabilized or stable to heatRegional AvailabilityEuropeDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.